A John Crane Metal Bellow Seal is a device designed for seals that require high temperatures. The John Crane Metal Bellows Seal is capable of handling carbonization, as well as thermal growth and high speeds. The John Crane Metal Bellows Seal is used for a variety of functions, including edge-welding and industrial pumping. The seal can be installed without expensive modification to the sealing chamber. Installing the seal is the step that immediately precedes installing the cartridge seals and the ECS.
Instructions
1. Place the stationary packaging into the packing cavity of the grand plate.
2. Place the mating ring over the stationary packing.
3. Align the drive pins with their corresponding slots in the mating ring.
4. Press down on the mating ring until the drive pins are secure in their slots in the mating ring.
5. Slide the gland assembly into the shaft. Make sure the gland assembly is as far away from the seal chamber as possible.
6. Slide the rotating assembly into the sleeve.
7. Move the compression ring all the way down the shaft until it is positioned behind the drive collar.
8. Align the compression ring with the scribe line and then tighten the screws.
9. Slide the gland assembly against the face of the seal chamber.
10. Tighten the gland bolts
11. Turn the shaft by hand and make sure it rotates freely.
Tags: John Crane, mating ring, Bellows Seal, Crane Metal, gland assembly, John Crane Metal, assembly into