The Emerson Universal Remote serves as a replacement or operating alternative for brand name remotes that have been damaged or misplaced. These items are cost efficient and easy to acquire, which gives consumers the advantage of not having to replace the item directly from the manufacturer. Universal remotes are user-friendly and easy to install. This article will explain the steps you will need to successfully program your Emerson Universal Remote.
Instructions
1. Turn on the electronic device you desire to program. Locate the device's manufacturer name which should be located on the front of the device. This will indicate which code needs to be entered to program the device. Position the remote control in direction of the electronic device. Press and hold the square "Code Search" button down for approximately 3 to 5 seconds or until a solid red light appears. This button will be located in the very top left corner of the remote control.
2. Determine the type of device your are trying to program and press it's identifier on the keypad. These buttons are located on the second row of the remote's keypad. They are labeled "Cable," "TV," "VCR," and "DVD." Choose your device accordingly. The red signal light located in top left corner of the remote should begin flashing when you press your device button.
3. Enter the three digit manufacturer code from the code list in order to program the device. Each time you press a button, the red signal light should flash. This is a strong indicator that the code is being processed successfully. After you have entered the entire manufacturer code, the signal light should shut off completely.
4. Press the remote's "Power" button and the device should power off. This is an indication that you have successfully programmed the device to function with this remote control.
Tags: Emerson Universal, Emerson Universal Remote, remote control, signal light, Universal Remote, corner remote