The Kodak V550 is a 5 megapixel digital camera released in 2005 as part of the EasyShare line of Kodak cameras. Though the camera will operate optimally for years, there will be times when the camera malfunctions or takes low quality pictures. You can save time and money by troubleshooting and fixing the problem before sending it off for service.
Power Issues
Several of the most common problems with the V550 can be traced to the power supply. If the camera does not turn on or off, the lens does not extend or retract or if the camera buttons do not work, first check that you are using the correct battery type. The V550 uses the Kodak rechargeable Li-Ion battery that is supplied with the camera. Different battery packs will not work with the V550.
If you are using the correct battery, make sure that it is charged. To charge the battery, connect the camera to the AC adapter included with the camera and plug it into a working power outlet. It takes approximately three hours to fully charge the battery. When charging is complete, four lights on the top of the camera will light.
Finally, if you can get power but you still cannot control the camera, turn the power off, wait five seconds, and turn the camera on again. This should clear out any errors in the camera. If this still doesn't work, check that you are not in "Favorites" mode. Turn off this mode by pushing the "Auto/Favorites" switch on the right side of the camera to "Auto."
Error Message
The V550 returns error messages on the LCD when there is a problem with the memory card or the battery. First, remove the memory card and try to operate the camera as normal. If no error message appears, insert the card again and try to use the camera. If the error message reappears, the memory card was corrupted and you will need to reformat the card. To reformat the card, press the "Menu" button, scroll through the list with the down arrow until "Settings" is selected and press "OK." Use the down arrow again to highlight "Format," press "OK" and "Menu." Please note that you will lose all information on your memory card when you reformat it.
If the error message exists with the memory card in or out of the camera, you may have a problem with the battery. Remove the battery and wipe off the contacts with a clean, dry cloth. Reinsert the battery and use the camera as normal.
Memory Card
The V550 may not recognize your memory card or the camera may freeze when using a card. In these instances, reformat the memory card and use the camera as normal. If the problem persists you will need to replace the memory card.
Tags: memory card, camera normal, card camera, error message, memory card camera, your memory card