If you would like to save money by not having to buy a dedicated CCTV monitor you can turn any TV into a monitor for your CCTV security system. If you have a TV with RCA type video input, the process is relatively easy. The output from a CCTV camera is one volt peak-to-peak; this is the same voltage a TV RCA video input requires.
Instructions
TVs With RCA Video Input
1. Plug the BNC to RCA adapter into your camera or video recorder output.
2. Plug the other end into your TV video input.
3. Turn on your TV and use the remote control to set the video input mode to "Aux 1" or "Aux 2." You will see the signal from your recorder or camera.
TVs Without RCA Inputs
4. Plug the BNC to RCA adapter into your camera or video recorder output.
5. Plug the other end of the adapter into the RF modulator input.
6. Plug the RG-6 coaxial cable into the RF modulator output and the other end into your TV cable or antenna input.
7. Switch the RF modulator to channel three or four and power on the RF modulator.
8. Turn on your TV and change the channel to the channel you set on the RF modulator unit. You will see the signal from your recorder or camera.
Tags: into your, video input, adapter into, adapter into your, camera video