The Garmin 250W is a GPS unit for your automobile that was released in 2004. The 250W comes with loaded maps for the United States and Canada, a 4.3-inch LCD touchscreen and audible directions. The 250W can be set up on your windshield or dashboard.
Attaching to Windshield or Dashboard
The 250W can be placed on your windshield or dashboard, depending on state law. In some states it is illegal to place a suction cup mount on the windshield, as it could obstruct your view. Check your state laws before placing the 250W on the windshield.
Whether you are attaching the 250W to the windshield or the dashboard, you must put the GPS unit in the supplied mount. Start by plugging the power cable into the back of the unit; it is difficult to plug the cord in after the 250W is sitting in the mount. Plugging it in first will save you trouble later.
Next, connect the cradle and the suction cup portion of the mount. The suction cup piece has a ball on the end of it that fits in the circular socket on the back of the cradle. Press the cradle firmly onto the ball until you hear them snap together.
Once the mount is assembled, clean off the part of the windshield where you want to place the 250W. Make sure the glass is dry before attaching the suction cup, or it could slide down the glass. Put the suction cup against the glass and pull the lever down to attach it.
Take the 250W and place the bottom end in the bottom of the cradle. Press on the top until it snaps into place. Check that the 250W is secure, and plug the power cord into a power outlet in your car.
If you want to place the 250W on the dashboard, clean the area of the dashboard where the mount will be placed. Peel the paper backing off the mounting adhesive disc, and place the disc on the dashboard. Once that is set, place the suction cup on the mounting disc and press the lever down to lock it in place. Attach the 250W as described above.
Satellite Connection
The 250W needs to connect to satellite signals to determine your location and plot your routes. To connect with the GPS satellites, stand outdoors in an open area press the power button to turn the 250W on. The connection may take several minutes. Try to stand away from tall trees or buildings, as they could interfere with the satellite connection.
Look at the screen of the 250W while it tries to connect to a satellite. Once one of the service bars turns green, you can use the unit.
The 250W should stay connected to the satellites after this first connection is made, even when you power off the device. The next time you power on the device you should acquire the satellite signal quickly. If, however, you lose the satellite connection or if the 250W cannot make the connection when you next turn on the device, repeat the above process to regain the connection.
Entering an Address for Directions
To set an address for directions, touch the "Where to?" icon on the screen. A menu will pop up with options for finding a location. Touch the "Address" icon, select a state, and touch "Spell City." Using the onscreen keyboard, type the name of the city or the ZIP code and touch "Done." A list of cities will appear on the screen. Select the city of your destination from the list. Enter the number of the address, touch "Done," enter the street name and touch "Done" again.
Once the address is entered, touch the "Go" icon to get the directions for the location. When you start driving, the 250W will give audible directions for each turn on the trip.
Tags: touch Done, your windshield dashboard, 250W windshield, audible directions, connect satellite