You can hook your Philips DVP642 Progressive Scan DVD Player's video output to your television in one of three ways: using CVBS cables--supplied with your Philips DVP642 Progressive Scan DVD player--an S-Video cable or Component cable. Choose the method you want to use from below and follow the simple steps to hook the video on your Philips DVP642 Progressive Scan DVD player to your television.
Instructions
Connect to a TV Using Composite Video Jack (CVBS)
1. Use the supplied composite video cable (yellow) to connect the DVD player's yellow video out (CVBS) jack to the Video In jack on your television.
2. Use the audio cables (white/red) to connect Audio Out (Left and Right) jacks of the Philips DVP642 Progressive Scan DVD Player to the corresponding Audio In jacks on your television.
Connect to a TV Using S-Video
3. Use the S-video cable to connect the Philips DVP642 Progressive Scan DVD player's S-Video Out jack to the S-Video in jack (labeled as Y/C or S-VHS) on your television.
4. Use the audio cables (white/red) to connect Audio Out (L/R) jacks of the Philips DVP642 Progressive Scan DVD Player to the corresponding Audio In jacks on your television.
Connect to a TV Using Component Cables
5. Use the component video cables (red/blue/green) to connect the Philips DVP642 Progressive Scan DVD player's "Pr Pb Y" jacks to the corresponding Component video in jacks (labeled as Pr /Cr Pb/Cb Y or YUV) on your television.
6. Use the audio cables (white/red) to connect the Audio Out (L/R) jacks of the DVD player to the corresponding Audio In jacks on the TV.
Tags: Progressive Scan, DVP642 Progressive, Philips DVP642 Progressive, your television, Philips DVP642, Audio jacks