Thursday, May 10, 2012

Use An Ansco Box Camera

The Ansco Box Camera, like the more famous Kodak Box Brownie, was marketed in the United States in the early part of the 20th century. It produces eight images on 120 film or other variations on 620 or 616 film. Only 120 film still is being manufactured. The large negative size allows for good-sized enlargements, although the limited shutter speed and lens quality may take away some of this advantage.








Instructions


1. Load the film in subdued light. Unclasp the camera back and take it off. Usually, the film roll goes in the bottom of the camera, threads past the back of the lens and goes onto the take-up reel on top. This may be reversed depending on the model. Close the camera back and use the red film window to watch the progression as you wind the film to frame one. Close the cover or tape up the red window to avoid light leaks.


2. Hold the camera vertically at about waist level and look down into the viewfinder. If you aren't able to see enough of your image, move the camera up to a better level for viewing. When you do this, the shutter release will be on your right. You also can turn the camera horizontally and use the other viewfinder for horizontal shots. The shutter release will be on top and you need to push it to the right to take the shot.


3. Use medium speed to fast film to get your shots. Films with ISO ratings between 100 and 400 will work best. Use slower film for bright daylight and faster films for lower-light situations. The 120 film is available in a variety of speed. The Ansco Box Camera only has one shutter speed, which is relatively slow and may have altered over the years since it was made.


4. Hold the camera steady for your photos. With a slow shutter speed, it is easy to get camera shake that will translate into blurry photos. If you can, rest it on something sturdy for your shots. Wind the film after each shot.








5. Develop the film yourself if you shoot black and white. Part of the fun of using vintage cameras is to shoot in black and white and develop it. You need to wind the film onto the reel in total darkness because modern film is too light sensitive for a safe light. Follow the development instructions on the film box. You still can scan your negatives and work with them in photo editing software to avoid the necessity of having your own darkroom.

Tags: Ansco Camera, shutter speed, black white, camera back, film still