The VSX-D307 is a multi-channel audio and video receiver manufactured by Pioneer. A/V receivers are used to integrate multiple audio and video devices to a home entertainment center set up. The receiver is also used to amplify the audio signal of each device connected to it. Hooking up different devices to the VSX-D307 involves using RCA cables to send the audio and video signals from the different playback devices to the receiver, and from the receiver to the TV and recording devices.
Instructions
1. Plug one end of the composite video cable into the composite "Video Out" jack located in the "Control" section of the back of the Pioneer receiver. Plug the other end of this cable into the TV's yellow "Video" input jack.
2. Connect one end of the red and white RCA cables to the matching colored RCA output jack on the back of your CD player, turntable or other audio playback device. Insert the other end of the red and white RCA cables into the matching colored RCA input jacks designated for the type of device being connected to the Pioneer receiver. For example, if one end of the RCA cables is connected to a CD player, connect the other end of these cables to the RCA input jacks located within the receiver's "CD" designated section.
3. Plug one end of another set of RCA audio cables into the matching colored RCA input jacks on the back of an audio playback and recording device such as tape or CD recorder. Connect the other end of these cables to the matching colored RCA output jacks located in the "Tape2 Monitor" section of the receiver.
4. Connect one end of the red, white and yellow AV cables to the matching colored AV output jack on the DVD player or VCR. Insert the other end of each AV cable to the matching colored AV input jack designated for the type of device being connected to the Pioneer receiver.
5. Use another set of AV cables to connect the AV output jacks on the back of the VCR (if you're using one) to the color corresponding AV input jacks in the receiver's "VCR" section.
6. Flip open the receiver's "Loop Antenna" latches. Insert the wires connected to the loop antenna into the "Loop Antenna" terminals. Close the latches to secure the wires to the terminal.
7. Connect the FM antenna wire to the "FM Unbal" terminal using the same method outline in Step 6.
8. Connect the speaker wires to the receiver's designated speaker terminals using the same method outline in Step 6. Connecte to the "+" speaker port, and the negative wire connects to the "-" port.
Tags: matching colored, input jacks, audio video, cables matching, cables matching colored, colored input