Programming a Norstar 8x24 is fairly quick and simple.
A Norstar 8x24 is corporate telephone conference control device with capabilities for eight telephone lines with 24 telephones. This means the control device, or "brain," has the ability to work eight separate telephone lines, each with a different number, while extending to 24 separate telephones within the corporation. During the initial setup process, certain administrative tasks must be configured for the Norstar 8x24 to perform properly. The most important feature required during the setup process is programming internal and external extensions into the control device's key panel. Programming a Norstar 8x24 is simple and doesn't require a lot of time.
Instructions
1. Locate the "Feature" key on the Norstar 8x24 keypad. The "Feature" key will play a large role in most of the device's functions and programming.
2. Press the "Feature" key, followed by *2.
3. Press the key that the extension number will be linked with. These keys are individual buttons and not part of the number. The display will then read "Extension #." Enter the extension number.
4. Press the "OK" key. Some older versions of the Norstar 8X24 may not have an "OK" key. If you cannot locate one, do not hit anything after entering the extension number. The device will automatically detect and save the extension.
5. Program external telephone numbers in a similar manner. Press the "Feature" key, followed by *1, then follow Steps 3 and 4 to complete this task.
Tags: Norstar 8x24, control device, extension number, Feature followed, Norstar 8x24, Press Feature