One of the easiest and most common aftermarket endeavors is the replacement of factory stereos. While the removal and installation of new stereos have similar procedures for varying vehicles, the Pontiac Sunfire has specific steps necessary for easy replacement.
Instructions
1. Disconnect the ground wire from the battery of your Pontiac Sunfire. The ground wire is the black wire connecting your battery to your Sunfire's body frame.
2. Access the screws that secure the radio molding to the dashboard. Open the glove box and unscrew the two screws on the left wall of the compartment. Once the screws are removed, you will be able to remove the molding by hand.
3. Remove the screws on either side of the stereo. Once they are removed, you will be able to slide the stereo forward to access the connecting wiring.
4. Disconnect the stereo wiring from the rear of the stereo.
5. Disconnect the antenna wire also located at the rear of the stereo. Remove the stereo completely.
6. Attach the stereo connectors and the antenna wiring to the back of the new stereo.
7. Slide the new stereo into the slot in the dashboard. Screw the two screws previously holding the old stereo. Replace the molding and secure it in place with the screws through the glove box. Reattach the ground wire to your Sunfire's battery.
Tags: ground wire, Pontiac Sunfire, battery your, rear stereo, removed will