Precision Interface Electronics (PIE) produces electronic equipment for vehicles, including a line of iPod adapters that you can use to connect your iPod to a vehicle's stereo. PIE makes a line of these adapters designed specifically for Honda vehicles, such as the Accord, that have a factory stereo system. You will need to connect various cables from the back of your stereo to the device to gain control of your stereo system.
Instructions
1. Flip the fourth DIP switch from the left to the "ON" position if your stereo does not have XM radio capabilities. DIP switches are located on the top portion of the iPod adapter. If your stereo has XM radio capabilities, leave all the DIP switches in the "OFF" position.
2. Disconnect the negative battery terminal from your vehicle before proceeding. The battery is located under the hood. Slide the metal connection ring off the terminal with the "-" symbol. If the battery is connected, you run the risk of electrical shock or damage to the vehicle or the adapter.
3. Remove the stereo receiver from the dashboard by pressing in on the locks on the four corners of the device and allowing it to slide out. Leave all connections in place.
4. Connect the 14-pin connector of the iPod adapter to the 14-pin auxiliary input on the back of the stereo receiver by pushing it into place.
5. Connect the 10-pin connection wire to the iPod adapter and route the other end to the location where you intend to place the iPod while it is in use.
6. Replace the stereo receiver back into your dashboard. When the radio is in place, go back and reconnect the battery by sliding the metal connection ring back onto the negative terminal.
7. Connect the other end of the 10-pin connection wire mentioned in Step 5 to the input at the bottom of the iPod. Turning the stereo to "Aux" mode will give you access to the files on your iPod, which you can control as normal.
Tags: your stereo, iPod adapter, stereo receiver, 10-pin connection, 10-pin connection wire