Many camcorders
can capture up to two hours of video at once.
You can connect a camcorder to your laptop computer using a FireWire or USB data cable. These cables convert raw video footage into a digital video signal that can be imported onto a computer. The footage can then be transferred to a video-editing application. It only takes a few minutes to set up the camcorder for video transfer.
Instructions
1. Determine the type of video outputs used by your camcorder. Most camcorders use a FireWire or USB connection. FireWire continues to be the most popular method because this medium can transfer data at a much faster rate than USB. Check your camcorder's user guide for the exact type of video output used by the device. The camcorder may also come with the required connection cables for your computer.
2. Insert the video connection cable into the video output jack on your camcorder. Insert the other end of the cable into an open FireWire or USB port on your computer.
3. Switch your camcorder to the "Playback" mode. This mode is used to play the footage you recorded on the device. The laptop will capture this video as it plays on the device. Many camcorders switch video modes through a circular switch around the "Record" button on the device. Move the switch toward the "Play" symbol on the camcorder. Check the camera's user guide for the specific location.
4. Open a video-editing application on your computer. The program will automatically detect your device. A new window appears allowing you to import the footage from your camera.
Tags: your computer, cable into, Many camcorders, type video, user guide