A running joke in consumer electronics has revolved around people's inability to figure out set the clocks on their appliances. Sadly, it's taken electronics manufacturers a while to realize there was some truth behind the jokes and make their clocks easier to set. Now, many manufacturers -- including Alpine, with its CDA-7965 stereo -- have added a clock button to simplify the process.
Instructions
Set the Time on an Alpine CD Stereo
1. Locate the "CLK" button on the left-hand side of the faceplate. The "CLK" button is directly above the main "MODE" button, to the right of the "INTLZ" button.
2. Pressand hold the "CLK" button until the time on the CD player's display starts blinking. This should take about three seconds.
3. While the time display is blinking, turn the "MODE" button until it shows the desired hour.
4. Press the "MODE" button to set the hour.
5. While the time display is still blinking, turn the "MODE" button until it shows the desired minutes.
6. Press the "MODE" button again to set the minutes.
Tags: MODE button, button until, Alpine Stereo, blinking turn, blinking turn MODE