Print The Polaroid Contact

Leaves are often seen in contact prints.

Many photography enthusiasts enjoy playing with different exposure techniques to create interesting photographic art. One way to do this is by using Polaroid film as a contact print. These prints are made when an object is laid on top of the film while it's quickly exposed, leaving an outline of the object on the film. The contact print is usually black and white, or sometimes blue and white, not full color.

Instructions

1. Take your Polaroid 669 pack film into a dark room. Remove the top cover from the pack while the room is dark.

2. Place your object on top of the film. This may take a little practice, as you must line the object up with the film by touch in the dark.

3. Activate your camera's flash on its weakest setting. Put your film pack back inside your camera. Once it's firmly inside, turn on the room's light.

4. Pull the exposed film out of the camera and peel off the backing. Wait for the exposure to finish developing to view your contact print. If you'd like more definition on your contact print, use a stronger flash setting for the next exposure.

Tags: contact print, film contact, film contact print, object film, your camera, your contact, your contact print

Make An Ir Light

You can make an infrared flashlight out of a regular flashlight.

Infrared (IR) light is invisible to the naked eye, but can be seen by its effects when used to illuminate a photo or video being shot. You can make your IR light with a few items from a hardware store and an ordinary flashlight purchased at a hobby shop or drugstore. Adult supervision is necessary if the one making the IR flashlight is a child since a soldering iron is used. Your IR flashlight will provide a beam of invisible IR light as well as any commercial model bought in a store.

Instructions

1. Put newspaper down on a table. Unscrew the reflector from the flashlight. Remove the plastic lens from inside of the reflector. Put the reflector down on the newspaper. Discard the plastic lens.

2. Remove the retaining ring from around the flashlight. Put the retaining ring down on the newspaper.

3. Remove the battery cap from the back end of the flashlight. Put the battery cap down on the newspaper.

4. Remove the batteries from the battery compartment of the flashlight. Put the batteries down on the newspaper.

5. Pull out the bulb module from inside of the flashlight using the needle-nose pliers.

6. Unscrew the incandescent bulb from the bulb module. Discard the incandescent bulb. Put the bulb module down on the newspaper.

7. Solder the long pin at the bottom of the IR LED inside of the hole in the center of the bulb module. Solder the shorter pin at the bottom of the IR LED to the outer ring surrounding the center hole inside of the bulb module. Let the solder cool for a minute.

8. Put the bulb module back into the flashlight. Push down on an edge of the bulb module with the needle-nose pliers so that it is properly seated inside of the flashlight.

9. Put the retaining ring onto the flashlight. Screw the reflector onto the flashlight.

10. Insert the batteries into the battery compartment of the flashlight. Put the battery lid back onto the end of your IR flashlight.

Tags: bulb module, down newspaper, retaining ring, battery compartment, battery compartment flashlight, compartment flashlight, down newspaper Remove

Change The Needle In A Red Arrow Tagging Gun

Tagging guns allow price tags to be attached without damaging the material.

Retailers use tagging guns to attach labels and price tags to items on which a sticker label can't be used. A tagging gun is equipped with a hollow, sharp needle that penetrates one point on the item, usually clothing, to deliver a plastic thread fastener through it. The needle of a tagging gun does not last forever, however, and eventually will have to be replaced. As long as basic safety procedures are used, replacing the needle is a simple process.

Instructions

Removal and Replacement

1. Remove the protective needle cover that conceals the needle on the gun. Be sure to wear protective gloves to avoid being stuck by the needle.

2. Locate the needle release lever and switch it to release mode. The release lever is a small plastic switch at the base of the needle. When the lever is locked, a small tab on the level will be pointing towards the stock and handle. Rotate the lever counter-clockwise (for most red-arrow models) so the tab points away from the stock and handle in order to set it to release mode.

3. Grip the base of the needle gently with your fingers and pull away from the gun to extract the needle. Make sure your fingers are away from the trigger.

4. Slide the replacement needle into the barrel with the needle notch facing upwards. The notch is a small groove on one side of the needle's base, which is the wider, flat end of the needle. Push the needle in far enough for the end of the needle's base to be flush with the tagging gun's casing. The end of the base is where the rounded base ends, and the thin needle shape begins.

5. Rotate the release lever clockwise to set it to the locked position. Gently pull on the base of the needle to ensure it is locked into the barrel.

6. Attach the plastic needle cover to the tagging gun so the needle is concealed.

Tags: away from, base needle, release lever, into barrel, needle base, needle cover

What Are The Main Parts Of A Digital Camera

The digital camera and its parts.

In the point-and-shoot world of personal photography, very few people don't own a digital camera. Well, if you own one, you might as well be familiar with the insides and "what makes it tick." There are many brands and types of digital cameras on the market, but they're all made up of the same components.

The Body

The body forms the foundation of a camera.

The main part of the digital camera is the body. Made mostly of hard plastic or aluminium, the body is the base unit of a camera, housing the internal and external mechanisms that produce images. You'll find the on/off switch, buttons for multiple settings, flash holder, viewfinder and battery/memory card compartment. More commercial models have the lens attached to the body. If the digital camera is an single-lens reflex, or SLR, different can be mounted and used.

The Lens

Removable lenses enhance a camera's versatility.

The lens is made up of the enclosure and glass lenses. If the lens is incorporated onto the camera body, then only the glass lens at the front of the lens can be seen. On an SLR camera, the lens is a separate part that attaches to the camera's body. Types of lenses include telephoto (used to enlarge distant objects) and wide-angle (used for closer objects and wider views).

Charged Coupled Devices

A charged coupled device is the workhorse of a digital camera.

The charged coupled device, or CCD, is the sensor used in digital and video cameras that records images. It is, ideally, a small chip that captures light and converts it to digital data, which then records onto the camera's internal memory or memory card.

Considered the digital version of film, the CCD measures a mere 1/6th or 1/5th of an inch in size, depending on the quality of the camera. SLR cameras usually have smaller CCDs that produce better quality images. The resolution of the sensor, measured in megapixels like 8MP or 21MP, also affect image quality. The higher the resolution, the more crisp detail within the photo.

Tags: digital camera, camera body, charged coupled, charged coupled device, coupled device

Compare Altimeter Watches

Mountaineering, rock climbing and sky-diving are sports in which an altimeter watch could prove useful. If you are prone to high-altitude sickness, then it might be lifesaving for you to monitor your bodies reaction as you gain altitude. Some altimeter watches can also be used to help measure changes in barometric pressure, which can be used to help predict upcoming weather changes, up to a day in advance.

Instructions

1. Make a list of functions that are important for your altimeter watch to have. Some examples might include elevation range, chronograph, water resistance, barometer, stored memory, heart rate monitor, GPS, thermometer or compass. You might also want to include a list of priorities, such as price, weight, functions, analog versus digital, size of the watch and used versus new. This helps to provide a bearing while you compare and contrast different watches. You might want to sort your list of priorities and functions in a checklist format for each watch that you consider for purchasing.

2. Use a computer with Internet access to research the companies and reviews of specific altimeter watches. Outdoor equipment is often put through a lot of dramatic environmental conditions and can easily fail or become broken. Make sure the company that you purchase your watch from is reputable and has a good return policy. Read reviews, both from other outdoor enthusiasts as well as professionals (See References) about each watch that you are considering.

3. Test each altimeter watch if you have access to an outdoor sporting goods store. Test the comfort factor of the watch and ease of pushing buttons. If you plan on wearing gloves while using your watch, bring the gloves to see how pushing the buttons and using the multiple functions of the watch work with your gloves. You might also want to test the night glow function of the watch to see whether it is bright enough and readable. Each watch might have a different comfort factor, as well as how it forms to your wrist. If you have small, slender wrists, then you might need to try on multiple watches before finding the one that fits you the best.

4. Purchase your altimeter watch and try it out. Wearing it around town will help you to get a better feel for the comfort and functions of the watch, enabling you to figure out with more precision what you like or don't like about it. Before using the watch on a high-adventure expedition, return it for another altimeter watch if you find that the first one isn't to your liking.

Tags: altimeter watch, also want, altimeter watch have, altimeter watches, comfort factor, each watch

Subscribe To Car Satellite Radio

Satellite radio is an innovative medium that has several advantages over conventional radio, such as the ability to maintain a signal over all of North America and the capability of offering uncensored material. Subscribing to car satellite radio is becoming much easier these days due to its increased popularity.

Instructions

Subscribe to Car Satellite Radio

1. Choose between the two satellite radio services in North America, Sirius and XM Radio, by comparing subscription rates, programming options, broadcast quality and the price of satellite receivers and accessories.

2. Purchase a satellite radio receiver from one of the many retail outlets in which they are available, including department stores, electronic retailers and audio-installation outlets. Choose from add-on receivers that use FM adapters to broadcast over regular radio frequencies and built-in units that are designed to replace factory-installed audio systems. You can even subscribe to satellite radio as an option when you purchase a new car, with dealers' specials often including free service for a year or more.

3. Install the satellite radio in your car according to the instructions in the owner's manual. Pay special attention to tips on install the satellite radio antenna, so that you will receive the best signal. If using an FM adapter to get the satellite signal, use an existing FM frequency that is not currently used by another station and program it into the receiver.

4. Subscribe to the satellite radio service by logging onto the website for either XM Radio or Sirius and choosing the subscription plan you want (see Resources below).

5. Enter the code on the back of the satellite receiver, and wait for your order to be processed. It usually takes just a few minutes.

Tags: satellite radio, satellite radio, North America, Subscribe Satellite Radio

Get The Right Lighting With Mini Dv Camcorders

DV camcorders are a relatively new style of camcorder that uses a small DV tape to record on. The size of the tape allows for a smaller camcorder that is more compact and easy to use. Finding the right lighting when using a DV camcorder is important to great footage.

Instructions

1. Become familiar with your ND filter which has 3 settings to allow light in. You want to adjust it depending on the amount of light in the area you are taping. The first level is off, which does nothing to change the lighting in the area. The next level is closed to 1/8th, which allows a moderate amount of light in. This is best used if indoors or on a cloudy day. The last setting is closed to 1/64th, which allows the least amount of light in. It is best used for taping outdoors on a bright day.

2. Use the iris to adjust the lighting more subtly. This allows you to bring in more light or pull more light down into the lens to get the best lighting for the surroundings you are in. You can adjust this in auto or manual mode, which allows for the most customization.

3. Adjust the gain to allow more light in. This works the opposite of the ND filter by allowing more light in, instead of blocking light out. There are 3 levels -- L, M, and H. They start at L and allow more light progressively through the levels. Look through the viewfinder or use the LCD screen to watch the difference when you are changing the modes to find the one that works best.

4. Practice using these 3 different sources of light apertures to find what works best for you and your situation. Once you become familiar with each of them, you will be able to find the best lighting for your DV camcorder in every taping experience.

Tags: more light, amount light, which allows, allow more, allow more light, best lighting

A Tutorial For Snagit

Snagit is a screen capturing software program for Microsoft Windows developed by TechSmith that enables you to capture screenshots of anything and everything on your computer screen. By capturing your computer screen, you can create user guides to send to your friends, create images and create images from a video file. Download and install Snagit to take advantage of this comprehensive screenshot program. As of 2010, Snagit 10 is the current version of this software.

Instructions

1. Download and install the free trial version of Snagit (see Resources).

2. Launch Snagit.

3. Open the file you wish to capture by clicking "File," "Open." You can open AVI, image, text and Snagit capture files.

4. Click "Open" to load the file into Snagit.

5. Click a capture profile from the Profiles section. SnagIt has capture profiles or types of capturing modes for you to choose from, such as Full Screen and Copy to Clipboard. The Full Screen capture profile captures the full screen as an image. Copy to Clipboard allows you to choose a specific area on your screen; for instance, you could capture one paragraph of a Web page article or the entire Web page. Play around with each capture profile available to see which one fits your needs.

6. Click "Capture" to create a screen capture in Snagit.

Tags: capture profile, computer screen, Copy Clipboard, create images, Download install, Full Screen

Pick A Digital Camera

After years of buying expensive rolls of film, and paying to have all of your pictures developed just to find the two or three you’ll keep because they’re not blurred or people’s heads aren’t chopped off, you have decide to find out about digital cameras.There are so many digital cameras to consider, with prices and features that may make your head swim, you think there has to be a way to help you make your decision.

Instructions

1. Don’t buy more than you need. Think about how and where you’ll use your camera. How experienced are you? Do you want a camera that is simple to use, or are you more of an artist and you want better control over your pictures? How much can you afford to spend?

2. Decide what resolution you need. Digital photographs are comprised of dots, called megapixels. The more megapixels making up the picture, the higher the resolution will be. Digital camera manufacturers have told us that more is better. However, unless you intend for a lot of your pictures to be printed in a large size, 4-5 megapixels is plenty.

3. If you plan to take pictures of subjects that are far away, consider what kind of zoom feature you will need. In the digital camera world, there are two types: Digital zoom and optical zoom. Digital zoom simply enlarges each pixel electronically, while optical zoom involves a physical lens magnification of the image you are photographing. Digital zoom is redundant because you can just as easily increase the size of your picture on your computer. So disregard all the hype put forth by the manufacturers, and look at cameras with the best optical zoom features.

4. Before you buy a digital camera, do some research. Don’t simply rely upon the advice of the helpful sales person. He may know less than you do, or he may recommend a camera because of an incentive. Also, read magazine reviews or go online to help you narrow your choices.

5. Once you have decided on the right camera for you, negotiate the price with your retailer. Add to your confidence by checking the Internet for the prices charged for the camera you want to buy. While some retailers may refuse to budge on the price of the camera, they may be willing to include memory cards, batteries or a camera case with your purchase.

Tags: Digital zoom, optical zoom, your pictures, digital cameras, make your, with your

Night Vision Goggle Instructions

Night vision goggles provide you with the ability to see in the dark. Most goggles use highly sensitive light openings that augment any usable light (from the moon or stars, for example) to provide images of what is in the view of the goggles. Using these goggles requires a basic understanding of how they operate and the safety precautions necessary for proper use. The goggles are for night vision, not necessarily for improved field of vision or magnified views.

Instructions

1. Turn the goggles on with the lens covers still on. Let the unit power up, making sure the batteries are fresh and functioning.

2. Place the goggles over your eyes and check for a fluorescent green icon indicating that the goggles are ready for use. Remove the lens covers, making sure you are in the dark and that the goggles are not pointing at any light source.

3. Grip the diopter (focus ring) between your forefinger and thumb and begin to bring the field of view into focus. The focus is ready when the fuzzy edges around objects are gone and the objects appear crisp.

4. Power up the infrared indicator (IR) if images are too dark or if vision is not improved. This increases the usable light and provides extra night vision.

5. Turn the goggles off. Take them off in the dark and let your eyes adjust before moving into any lit area.

Tags: lens covers, making sure, that goggles, Turn goggles, usable light, your eyes

Remove A Sim Card For A Nokia 3360

A SIM card is a small hard plastic card that stores cell phone account information on the card. Most cell phone service providers use cell phones with SIM cards. The SIM card holds the user's cell phone account information allowing the phone to be reached when that user's number is dialed. The card may also hold the user's phone book of contacts as well as text messages and personalized settings.The Nokia 3360 is a GSM phone and all Nokia 3360s have a SIM card issued by the cell phone service provider.

Instructions

1. Turn off the cell phone by holding down the "Off" button, which also serves as the end call button. There is a red graphic of a phone on this button that is on the top right hand side of the keypad.

2. Turn the cell phone over and locate the gray plastic button on the lower part of the phone's back. Gently push the plastic button in while sliding the back cover downwards. The back cover will slide off revealing the battery.

3. Remove the battery by lifting it up from the bottom and pulling it out.

4. Locate the SIM card. The SIM card is a small hard plastic square that is around 1 to 2 square cm in size. The card may have your cell phone service provider logo on it or it may be a plain solid color. There will be gold lines on the card, which is the card's circuitry.

5. Slide the small metal clip that is covering part of the card downward. You may have to slide it upward depending on which direction the phone is facing when you are holding it.

6. Gently use your thumb to slide the SIM card up and out of the slot away from the metal clip. Do not apply too much pressure as this can damage the card.

Tags: cell phone, cell phone service, phone service, account information, back cover, card small

Compatibility Of A Tamron Lens With A Digital Canon

Tamron produces digital SLR lenses for camera bodies from Nikon, Sony, Pentaz and Canon. Every type of lens that Tamron produces is available with an EF mount socket, making them compatible with all Canon EOS cameras.

Nondedicated Lenses

Nondedicated lenses have a wide focal range, enabling the lens to capture both wide-angle and telephoto shots. Tamron's line of nondedicated lenses includes the 18-270mm Pezo Drive, the 18-270mm Vibration Control and the 18-200mm. All three lenses have a maximum aperture of F3.5.

Fast Lenses

Faster lenses have a wider maximum aperture setting than most lenses, usually topping out at F2.8. Tamron's fastest lenses include the SP 17-50mm F/2.8 VC and the SP 17-50mm F/2.8.

Super-Wide Lenses

Super-wide angle lenses allow photographers to pick up a very wide, up close perspective in their images. Tamron' s widest lens is the SP 10-24mm. The maximum aperture of the lens is F3.5.

Telephoto Lenses

Telephoto lenses allow photographers to close in on subjects that are far away. Tamron's one dedicated telephoto lens is the 55-200mm. The maximum aperture of the lens is F4.

Macro Lens

Macro lenses, commonly used for nature photography, are designed to let photographers get very close to their subjects. Tamron's only macro lens is the SP 60mm F/2 Macro.

Tags: maximum aperture, lenses have, allow photographers, aperture lens, lenses allow, lenses allow photographers, maximum aperture lens

Change Picture Quality

Digital photography and photo editing has made personal photography more popular than ever. Technological advances in both camera and editing software allows even the most casual photographer to create professional-quality images. The features of most photo-editing programs include many options to enhance or change images, including changing the overall picture quality. You can change the quality of your pictures by following a few simple steps.

Instructions

1. Launch your photo-editing software. Most digital cameras come with software, but you can use the link below to access a list of free programs. There is also a link to a free trial of Microsoft Office, which includes Picture Manager. While the terminology varies slightly from program to program, the functionality is the same.

2. Open the picture for which you want to change the quality. Click once on the "File" drop-down menu and select the "Open" option. Use the "Look in" drop-down menu to access the folder to which you have the image saved. Click once on the image and then once on the "Open" button.

3. Click once on the "Edit" button, which will launch a separate task window at the right of the screen. Click once on the "Resize" link under the "Change Picture" heading. This action will change the options in the task window to a listing of resizing options.

4. Use the "Resize" categories to change the quality of your image. You can use the "Predefined" drop-down menu to select from a customized list of sizes. Remember that the higher the megapixels, the better the picture quality will be. You can also enter a custom megapixel listing for your image using the "Custom" fields. Click once on the "OK" button after making your selection.

5. Remember to save your adjusted picture. Click once on the "File" drop-down menu and select the "Save As" option. Use the "Save In" drop-down menu to select a folder in which to save the new image. Click once on the "Save" button.

Tags: Click once, drop-down menu, drop-down menu select, menu select, change quality

Stop Thermal Imaging

Conduct a simple experiment to determine whether an infrared device can see through your clothing.

Sight is due to electromagnetic waves (light) reflecting off objects and into eyes. However, eyes can only see electromagnetic waves with a wavelength of 380 to 400 nanometers. This, in general, limits sight to outer surfaces. Other wavelengths of light are able to penetrate thin materials, and if a device can "see" at these levels, then it may be possible to see through an object. One such device is a thermal imaging camera, and today there is a great deal of concern about people using these devices to see through clothing.

Instructions

1. Understand that thermal imaging works in the part of the electromagnetic spectrum known as the infrared region. Infrared radiation is like light, but it is emitted by an object that is warm, such as a person's skin. Infrared radiation travels through some thin types of material.

2. Test your clothing yourself to determine whether thermal imaging will penetrate it. Place the item of clothing that you want to test on a hanger.

3. Stand facing the front of your television at a distance of around 6 feet. Hold the coat hanger out in front of you at arm's length.

4. Aim the remote at your television with the item of clothing between the television and the remote. Press the remote up against the item of clothing and press a button on the remote, for example "Channel Up." If the TV responds, you know that infrared radiation has passed through the clothing, and thus an infrared camera could see through it as well.

5. Repeat for different items of clothing as well. Take note of what allows infrared and what does not. Clothing articles that do not allow transmission are those that will stop thermal imaging devices from invading your privacy.

6. Dress in layers if you are going to be exposed to thermal imaging. Very thin, cotton-like materials are easily penetrated with infrared, but the more layers you wear, the less likely transmission becomes. Thick and heavy fabric also blocks the infrared radiation, stopping people from seeing through your clothes. Color is important as well, and darker colors will block infrared more readily than lighter colors.

Tags: item clothing, thermal imaging, determine whether, electromagnetic waves, infrared more, thermal imaging

Nanny Cam Techniques

Everyone likes to believe that their babysitters, maids and others trusted with access to the home are behaving appropriately. Knowing for certain requires some form of surveillance, and nanny cam fills that role brilliantly. Cleverly hidden inside most any object, this camera allows you to monitor your home from anywhere. Certain techniques for using nanny cams will better document the activities inside your home, and knowing these will put your investment in the device to better use.

Hiding

The most important aspect of placing a nanny cam is its invisibility. Visitors in the home should not be able to easily detect the camera. Guests should not feel as though there is any surveillance equipment in the home at all. The nanny cam has to be hidden cleverly in any one of the household items present in the room. This item also should not be hidden in something that will be picked up by anyone. An ideal nanny cam would be one hidden in a clock or an appliance, such as the air conditioner or an air ionizer.

Placement

The camera should be placed in a room where someone is most likely to misbehave. Anywhere that has valuables is a prime location for a nanny cam, along with bedrooms and children's playrooms. Place the nanny cam so that it has an unobstructed view of as much of the room as possible. Avoid any backlighting, which occurs when the subject is standing between the light and the camera.

Privacy Considerations

It is illegal to place a nanny cam in areas where visitors require privacy, such as in a bathroom or a dressing room. Place the camera in common areas of the home but not places where someone has a reasonable expectation of the privacy.

If your nanny cam offers audio recording as well, legal implications arise. Everyone is protected by law against wiretapping and eavesdropping, and each state has laws regarding recording of conversations. This being the case, it is not a good idea to have an audio recording in the nanny cam.

Tags: audio recording, where someone, your home

Take Good Pictures Of People

Anyone can take good photographs of people.

Taking good photographs of people might seem challenging, but it's a lot easier if you arm yourself with a few good tips, guidelines and tools. Knowing where the light should be and looking for the right background can make all the difference in how your pictures of people turn out.

Instructions

1. Choose your location carefully. Location can make the difference between a terrible picture and a great one. Make note of any location you see when you're out and about that makes you think, "That would be a really good place to take some pictures." Look for places that would provide a simple background. You don't want anything too busy, because that can take away from the person you're photographing. Avoid locations that are full of things like overpowering visual patterns, crazy shapes and loud colors. If you can't find a simple background -- or if you refuse to pass up a crazy location -- use the manual focus on your camera to make the person in the foreground stand out and minimize the background. Blurry backgrounds make for good photos, too.

2. Make use of bounce cards and back lighting. If you're taking pictures of somebody in the shade, use a section of white poster board or something similar to bounce light from the sun onto the person's face while they're sitting in the shade. This might not sound like it would do much at all, but you would be really surprised the difference a bounce card can make for your photography.

Also try positioning your subject so that the sun is right behind him. This is called back lighting, but this technique is often avoided because it often doesn't turn out correctly. But with the right lighting and positioning, back lighting can create a sort of halo effect coming off of the person in the picture.

3. Position yourself so that the sun is behind you and over to one side or the other. If the sun is really bright that day, have yours subjects in the shade. Direct sunlight can wash out a person's face and features. Also remember that you can always add to or take away from a picture with digital image editing software after you take the photo, but only if you take a well-lit photo in the first place. There's not much editing you can do if your photo is overexposed, so you want to always at least get a solid, natural photo from the start. Usually the best time of day to take good pictures of people is in the mid- to late-afternoon. The sun's position gives your subject a really nice, warm glow.

4. Consider the framing and composition of your photo. This is what separates the professionals from the amateurs. Framing and shot composition has to do with where you put your subject in your photo. Is the person in the center of the picture or off to the side? It's up to you, but here's some general guidelines. Try to frame your photograph so your picture is mainly of the person's head and some of their shoulders. The closer and tighter you are on the person, the better it usually looks. Remember that you're taking pictures of people, and the most interesting part of a person usually is their face. You don't need to worry about showing what kind of shoes or pants the person is wearing. Just focus on the face.

5. Keep it conversational. Unless you're dealing with a professional, the person you're photographing will probably be a bit uncomfortable, especially at first. Remember your job as a photographer is to get the best pictures you can get, and sometimes that turns you into a director of sorts. You want your subject to be relaxed and calm. Be at least somewhat excited about the photos, and let the person know when you've taken a really good one. Also keep in mind that a person can hold still only for so long, and an unhappy person produces an unhappy picture. Unless you're going for a heavy metal anger type of vibe, you're going to want to keep your subject somewhat at ease. Think of it as a great time to improve your people skills.

Tags: your subject, back lighting, your photo, away from, good photographs

Troubleshoot A Nikon 90

The D90 is an award-winning digital camera.

The D90 is a type of digital SLR camera produced by the Japanese manufacturer Nikon. The camera won the TIPA European Photo & Imaging "Best D-SLR Advanced" award in 2009 and is a popular digital camera model. If something goes wrong with your D90 camera, it can be frustrating, but by following a few simple steps you should be able to troubleshoot common problems. Fixing or establishing the cause of the problem should only take a few minutes.

Instructions

1. Try the basics first. Check that the camera is turned on by turning the on/off dial near the shutter-release button to the "On" position. Make sure the lens cap is removed and not covering the end of the lens, and that a digital memory card with available space is inserted in the camera. If the memory card is full, the camera will not be able to take any more pictures and will display an error message telling you to make room on your existing card or insert one with available space.

2. Remove the battery and recharge it. If the battery is dead, the camera will not work. If the battery does not hold a charge or does not provide power it could be damaged. A faulty battery will not give power to the camera even if it has been charged. If you have a spare battery, try it instead. If not, consider replacing the battery.

3. Check that the lens is correctly connected. To make sure you are attaching a lens correctly, line up the printed dots on the lens and on the body of the camera and rotate counter-clockwise. The lens will click when properly connected. Check that the switch on the side of the lens is set to "AF" if you plan on using auto-focus.

4. Reset the camera if you lose control of the cameras settings. For example, you might adjust the shutter speed and aperture but be unsure return them to default mode. Hold down the "+/-" and the "AF" buttons on the back of the camera for a few seconds. The buttons should have green dots printed next to them. The LCD screen on the top of the camera will flash to indicate that the reset has been successful.

5. Take the camera to a professional. If the previous steps do not clear the problem or give an indication of what it is, send the camera to be repaired. Depending on when you purchased the camera, you may be covered by the manufacturer's warranty.

Tags: camera will, Check that, digital camera, available space, lens correctly, memory card

Upload Music Onto A Motorola Razr

These days it seems that what a phone looks like and what features it has have just as much to do with a person's decision to buy it as their ability to actually talk on the phone. Early on the RAZR caught the eye of cell phone users with its sleek design. In its later models--starting with the V3i--it caught up in the features department by making the phone compatible with Apple's iTunes software and adding a microSD memory card slot so users can store more than a handful of songs on it. And with a few simple steps, the RAZR can now be turned into an MP3 player.

Instructions

Get Music on a Motorola Razr

1. Install a microSD memory card into your RAZR by opening the battery door on the back of the phone. The card is placed underneath the small metal brackets located above the battery.

2. Next you'll need to set the memory card as your default USB connection in order to save music to the card. Start this process by pressing the "Menu" key. This key is located above the circular "Navigation" key, which is located on the center of the phone between the screen and number keys.

3. Use the navigation key to scroll to "Settings" and press the "Center" key, which is located in the middle of the navigation key.

4. Use the navigation key to scroll to "Connection" and press the center key.

5. Use the navigation key to scroll to "USB setting" and press the center key.

6. Use the navigation key to scroll to "Default Connection" and press the center key.

7. Use the navigation key to scroll to "Memory Card" and press the center key.

8. Open your iTunes software on your computer.

9. Connect your phone to your computer using the USB cable that comes supplied with the RAZR. The phone's mini USB connection is located on the lefthand side near the bottom of the phone.

10. Once your computer and the software recognize your phone has been plugged in a "Phone" icon will appear in your iTunes menu. Select the songs you want on your phone and drag them to the icon.

Tags: navigation scroll, press center, center navigation, center navigation scroll, memory card

Cover A Fluorescent Light Box In A Kitchen

Fluorescent light boxes are not only unattractive, but they are also harsh and noisy. Lights of this type are often found in older apartments and homes dating back to the 1940s of 1950s. By adding rice paper to the light box cover, you swap out that old light that looks like it was designed for a cafeteria and give it a new personality. Pick a color that matches or complements your kitchen d cor.

Instructions

1. Move the stepladder into the kitchen, placing it off to one side of the light box. Climb onto the ladder and examine the box. If the box has any screws attaching it to the ceiling, remove the screws and bring the box down. If the light is permanently attached, then paste the paper to the light box while it hangs.

2. Wash the outside of the light box with a little warm water and soap, removing any dust or debris caught on the box. Dry it carefully with the paper towels, making sure that you remove all of the water and leave the box completely dry.

3. Cover your work area with old newspapers and set the light box in the center. Spray an even layer of the spray adhesive over one side of the light box. Tear the rice paper into pieces the same size as that side of the box, or use scissors for a more uniform look.

4. Press the paper against the light box and gently smooth it across the surface. Run your hands against the rice paper, using a firm enough touch that you push out any air bubbles trapped between the paper and the adhesive. Repeat the process on each side of the light box.

5. Look over the light box carefully, looking for any damaged areas or spots that shine through the paper. If you see any, apply more spray adhesive and add more rice paper to the spot. Reattach the light box to the kitchen ceiling and enjoy the new look.

Tags: rice paper, side light, paper light, spray adhesive

Great Gifts For Guys

Shopping for "the man who has everything" is not easy because he might not need what you want to give him. Or he might not like what you think would be nice for him. Still, there are great gifts for guys that won't break the bank or send you to extraordinary lengths to find just the right present.

The Classic and Classy Man

This type of man, who has a more executive or Chianti lifestyle, likely could use some ties, pens, cuff links, wallets, belts and other accessories that never go out of style. If the recipient is a man who appreciates the art of looking unique, add a little extra style with a monogram.

The Athlete

For the active man who does not mind breaking a sweat, gifts that acknowledge his athletic side could be most appropriate. A subscription to a sport-and-fitness magazine, a gift certificate to a health club or that brand-new putter he's been looking at would be fitting.

The Epicurean

The man who likes the finer things in life would appreciate a great dinner out, an excellent bottle of wine or that cooking gadget he's been eyeing.

The Craftsman

The man who likes working with his hands may be easily pleased with a new set of high-quality tools, a gift card to his favorite hardware store, or if you really want to make his day, a set of hand-held power tools.

The Couch Potato

Face it: He likes to watch TV. A universal remote control, a sound system to augment the theater experience, wireless headphones, TiVo or even a play station might do the trick.

The Intellectual

If he doesn't already have a million books, Amazon.com or some other online bookseller might have the titles he would appreciate. Perhaps an audio book or online download would be a good and more fun idea. And why not some games that would make him think, such as a chess board or some puzzles.

The Gadget Man

"Toys," such as Ipods, digital cameras, even those robotic dogs might make him happy. However, other useful gadgets such as personal organizers, digital translators or an iPhone could be more cherished.

The Bad Guy

This type of guy could welcome more eccentric gifts. Perhaps a trip to Vegas or a bottle of smooth whiskey would make him happy.

Tags: make happy, This type, would appreciate, would make

What Are Flashed Phones

You might be able to flash your phone to a new service.

When a phone is referred to as being "flashed," it can mean several different things. If the device is a non-smartphone, the definition is limited. Otherwise, specification is definitely needed as to what it means.

Flash to Another Carrier

If you plan on switching carriers but absolutely love your phone and can't find anything close to it, you may consider flashing your phone. This is essentially the same as unlocking a SIM card slot to be used with different carriers. Examples are Verizon Wireless phones being flashed to Cricket or MetroPCS. Being flashed to another carrier is the only category that a non-smartphone can be in. Smartphones can be flashed in this manner.

Flash a ROM

When an Android phone is rooted, you gain full control of the phone. You are able to install apps that won't work on non-rooted phones as well as change the entire setup and feel of the phone. The most common way to do this is to flash a new ROM onto the phone. The ROM contains the look, feel, functionality and even some apps for the phone while still giving the user choices and control.

Flash a Kernel

Power users may go further than flashing just a ROM and flash a new kernel onto the phone as well. A kernel controls deeper functions of the phone and allows users to demand more power. Users who overclock their phones flash kernels over the existing one.

Adobe Flash Player

Many modern smartphones are capable of running Adobe Flash Player. This allows the phone to browse websites' built-in Flash almost as well as a computer depending on processor power as well as screen size. While this is used to describe "flashed phones," it is the least common use of the term.

Tags: your phone, Adobe Flash, Adobe Flash Player, being flashed, Flash Player

Record Over Store Bought Video Tapes

DVD and Blu Ray discs have expanded many people’s home video collections, and a lot of the time, the purchasers are upgrading to a new and flashier version of the VHS of that movie. They may find themselves with a lot of VHS tape that they do not want, but instead of selling or throwing the tapes out, you can do a trick to make the tapes recordable.

Instructions

1. Test the video tape inside of your VCR. Make sure that the tape has not been overplayed and the quality of the video is pretty reasonable. If the video is jumpy or scratchy, then just throw the tape out.

2. Try recording something onto the tape. VCRs should automatically reject the tape, but if it records than you have nothing to worry about and can use the tape for continued recording.

3. Look at the front of the tape. The movie’s runtime should appear on the tape’s main label. Add about fifteen minutes to this runtime and that is the approximate amount of recording time you will have on the tape.

4. Rip off the label, white it out, or cover it with a new label. Add the runtime onto the label and make sure that the other label is covered so you do not get confused.

5. Look at the bottom front side of the tape. Towards the left side there should be an area shaped like a square that is indented in. This is the area that controls whether recording on the videocassette is allowed or not.

6. Grab a piece of duct tape or scotch tape and evenly cover the hole. Make sure that the tape is evenly spread out to help prevent damage.

7. Insert the tape into your VCR.

8. Press the record button to test the tape. Rewind the tape a little bit and watch to see if the recording worked.

Tags: sure that, Make sure that, sure that tape, tape evenly, that tape

Threeway Vs Twoway Tripod

Cameras and video cameras are mounted to the tripod head.

A tripod is used for stability when working with an optical device such as a camera or video camera. Tripods come in all sizes, from small table top to large models mounted on wheels. As the name suggests, tripods have three legs. The legs of the tripod are adjustable, and wider legs create a stable base for the tripod. Two-way and three-way tripods refer to the user-adjustable positions of the tripod head. The tripod head is located at the top of the tripod. In order to use a tripod you must first mount your camera or video camera to the connection screw on the tripod head. Once attached, you adjust your camera by moving the tripod head.

Still Photography

In photography, tripods commonly capture still shots, when a steady camera can be the difference between a blurry shot and a great photo. Some photographers also use tripods for high zoom, motion shots. Typically any high level of zoom can make a shot unsteady. A tripod helps to eliminate the shakes and jiggles that occur when a camera is hand held.

Shooting Video

When shooting video, the use of tripods is very helpful for achieving a steady, smooth shot. Choosing the right tripod can have an effect on the quality of the image you are able to produce, by eliminating unwanted motion which results in shaky video. Mounting a video camera on a tripod eliminates the need to support heavy video cameras and gives you more time to focus on positioning and framing your shot.

The Two-Way Tripod Head

Standard pan-tilt head, two-way tripods are designed to move in two directions, pan and tilt. Panning is a left to right, horizontal motion, while tilting is an up and down, vertical motion. There are separate controls for panning and tilting the tripod head. Handle controls are loosened or tightened to control the movement on each axis.

The Three-Way Tripod

Three-way tripods are designed to move in three directions, pan, tilt and also sideways tilt. The sideways tilt allows the camera to rotate 90 degrees between a horizontal, landscape view and a vertical, portrait view. A locking hinged platform attachment on the head of the tripod allows this rotation. The addition of the horizontal and vertical tilt gives the user greater control over their shot.

Choice

The choice of using a three-way or two-way tripod has a lot to do with the application. If you are using a video camera you will not find any conventional need to tilt your camera between portrait and landscape view. For video use, a two-way tripod is a good choice. However if you are a photographer you may find the three-way tilt feature to be a useful one. Not only can you fully rotate your camera 90 degrees, you can also choose to go for effect and position the camera somewhere in between for an interesting and unique perspective. For photography a three-way tripod gives you more options on angles for your photography.

Tags: video camera, your camera, head tripod, tripod head, tripod head, camera video

Definition Of Camera Shutter & Release

The shutter release is the 'go' button on a camera.

The shutter-release button on a camera is the final act in taking a photograph with an single-lens reflex camera (SLR) or digital single-lens reflex camera (DSLR). After the aperture, shutter speed, ISO and focusing have all been set, that button is the "go" or "record" button of the camera.

Shutter

A camera shutter can be thought of exactly like a window shutter on a house; it is responsible for blocking out or letting in the light. In a DSLR camera, the shutter is a thin sheet that covers the digital sensor that acts as the film of the camera. The photographer is responsible for setting how long the shutter stays up or open with each shot. The greater the shutter speed, the less exposure time; the lower the shutter speed, the greater the exposure, meaning that more light is let in.

Shutter-Release Button

The shutter-release button allows the physical act of taking a photograph. It is the button, usually top right on the camera, that the photographer presses when she is ready to take the shot. When pressed, the shutter is released, that is it is moved out of the way to allow light to enter the camera and produce an image or the photograph on the camera's sensor. The shutter release performs the same function in a film camera, when the button is pressed, the plastic shutter moves out of the way to allow light to enter and expose the film.

Mirror Flip

All SLR and DSLR cameras contain mirrors that allow the photographer to view the framed image in the view finder. Without a mirror, the photographer would have to shoot blindly. The mirror is placed directly in front of the shutter, so it can bounce the image up and out of the viewfinder. As the mirror is in front of the shutter, it must be moved in order for the shutter to open and allow light to enter the camera. When the shutter release button is pressed, the mirror flips upward and out of the way simultaneously with the shutter opening and closing. The mirror flipping along with the shutter opening and closing are what are responsible for the audible "click" noise that occurs upon pressing the shutter release button. Unfortunately, however, as the mirror must "move" it unavoidably causes added movement (blur) to the photograph.

Shutter Speed

The shutter speed (SS) is how the photographer goes about setting the amount of time the shutter is open. The SS is expressed in fractions of seconds: 1/30, 1/25, 1/60, 1/250, 1/8,000. The smaller the fraction (the greater the number on the underside of the fraction bar) the faster the SS. A faster SS means the shutter is open for less time, and, therefore, the likelihood of blur is decreased. On film SLR cameras, the SS is set using the top right dial on the camera body. In a DSLR, the SS is usually set through a thumb dial on the back of the camera body.

Obtaining a Fast SS

A faster SS means less blur, but a faster SS also implies less light is being let in, so in low-light situations, sometimes a fast SS cannot be used. In order to obtain the fastest speed your lighting situation allows for, there are three adjustments you must make to your camera. The first is stopping down your aperture to the widest possible (lowest number), the second is bumping up the film speed ISO to as high as you are comfortable with (the only drawback with a high ISO is that it increases graininess) and the third is steadying your camera with a tripod or resting your body and arms against a wall, table, chair or anything that can add extra grounding for the camera in order to reduce blur.

Tags: allow light, allow light enter, button camera, light enter, release button

Turn Off The Flash On A Nikon D40

You can turn off the flash on your Nikon D-40 to take pictures in the sunlight and save battery power.

The Nikon company is known for its digital cameras and related gear. The D-40 is one of Nikon's top-selling brands, allowing users to switch lenses and preview their shots with the help of an LCD screen on the rear of the camera. The Nikon D-40 has a built-in pop-up flash that can help you get the shot you want in a low-light area. The flash is not always useful, however. By pressing the correct buttons on the body of your Nikon D-40, you can turn off the flash to take pictures.

Instructions

1. Turn on the Nikon D-40 camera. Use the dial at the top of the body to select the shooting mode that you want to take photos in. Note that the flash will not be activated using the action or landscape modes.

2. Press the "Flash" button, which is located near the dial at the top of the body of your Nikon D-40 and features a symbol that looks like a lightning bolt. Pushing this button will rotate through the various flash options, allowing you to control how much flash is used while you are shooting a photo or, in this case, to turn the flash off completely.

3. Press the "Flash" button until the symbol in the lower left corner of the screen on top of the camera (which displays information about the mode you are shooting in) is an encircled "Flash" lightning bolt with a line through it. This indicates that the flash has been turned off.

4. Gently press the pop-up flash at the top of the Nikon-D40 down with your finger until you hear a click. This indicates that the flash has been locked down. With the flash mode turned off on the camera and the flash physically locked down, the flash will not go off while you are shooting photos, saving you battery life.

5. To turn the flash back on, select the "Flash" mode you want to use using the "Flash" button. Line up a shot, focus and push the button to take the photo. The flash will pop back out on top of the camera and stay engaged until you turn it back off again.

Tags: Nikon D-40, your Nikon D-40, Flash button, flash will, that flash, turn flash, your Nikon

What Is The Difference Between A Writeable Vs Recordable Cd

A recordable CD is great for storing files long term.

When shopping for recordable CDs, it can be difficult to discern exactly what to purchase. CD-R (Compact Disc Recordable) and CD-RW (Compact Disc Rewritable) are the most popular discs, and though they sometimes can be used interchangeably, they also have their own special functions.

CD-R

A CD-R is a standard blank CD. It can contain many forms of data, such as music, photo and video files. When a CD-R is burned, it becomes a CD-ROM. CD-ROM stands for Compact Disc Read Only Memory, and is what you purchase in a store. A CD-ROM cannot be recorded again or edited in any way.

CD-RW

A CD-RW is also a blank CD, but it is made using a different process that allows it to be rewritten many times. Re-recording is not selective. All of the information on the disc must be removed before new information can be stored. The CD-RW supports the same file types as the CD-R.

Playback of CD-R and CD-RW

Because of the differences of the two types of CD, playback in different types of machines varies. If the CD-R is burned well, it will play back in both a computer and a CD player. However, a CD-RW does not work well or at all in CD players.

Tags: Compact Disc, CD-R burned, what purchase

Diy Helmet Camera Mount

Mounting a camera to a helmet can be done with supplies from a hardware store.

Lovers of outdoor sports are surely familiar with the helmet camera mount seen in most sports videos. Mounting a camera on top of a helmet will allow you to shoot video of your biking trip or other activities that look similar to what you are seeing from your own eyes. Professional helmet camera mounts are very expensive, but if you are crafty, one can easily be constructed from materials found at your local hardware store.

Instructions

1. Cut holes into the felt pads using your box cutters.

2. Place the felt pads onto the washers.

3. Remove the top padding from the helmet.

4. Insert the machine screw and washer into the vent of your helmet. Place one of the felt-covered washers on the other side of the helmet vent.

5. Attach the bolt to the machine screw and tighten.

6. Drill a 1/4-inch hole into the top of the bottle cap.

7. Place the bottle cap on top of the end of the screw.

8. Replace the padding in your helmet.

9. Attach your camera to the helmet mount by screwing its tripod mount on to the screw at the top of the helmet.

Tags: camera helmet, felt pads, hardware store, helmet camera, machine screw, Mounting camera

Most Powerful Spotting Scopes

Many powerful spotting scopes are available on the market, and each has benefits and drawbacks. Your choice of scope depends on budget, power of magnification and whether you're going to hunt or view wildlife.

Carl Zeiss Diascope 85FL

The Zeiss Diascope 85 has a large 85 mm objective lens that provides around 30 additional minutes of viewing earlier and later in the day than other scopes. Its angled view allows individuals of varying heights to use the scope without adjustment. The eyepiece is large and rotates to the side so you can easily use it mounted on a car window. A nitrogen gas filled unit, it is both fog and waterproof. The lightweight scope comes with a transferable lifetime warranty and sells for about $2,500.

Fujinon 80

Like the Zeiss Diascope 85, the Fujinon 80's large 80 mm objective opening is big enough to let you put the scope to work early in the morning and at dusk. It has a 20 x 60 zoom eyepiece. The scope can fog since it's not gas filled. The scope comes with a limited warranty and sells for about $1,000.

Swarovski 80 mm

The Swarovski 80 mm is a popular high-end spotting scope. It has different eyepieces, with 20 x 60 the most popular. It is gas-filled and resistant to fog and water. The eyepiece rotates so you can use it with a vehicle window mount. The unit comes with a limited warranty and sells for around $1,800.

Leica Televid APO 25-50 x 82 mm Spotting Scope

This Leica has a large 82 mm objective lens and a 25 x 50x zoom eyepiece. It is available in the angled or the straight body type. This model provides fine, natural details in high resolution even in poor light. It also can be used as a camera through use of digital adapters and costs around $4,000.

Tags: comes with, large objective, warranty sells, Zeiss Diascope, comes with limited, large objective lens

Import Songs Into Itunes

The preferred file format for iTunes is M4A but you can play songs that are in other audio file formats as well. You can import songs into iTunes from a CD or from your Windows Media collection or even your iPod! Here's how.

Instructions

Import From a CD

1. Insert a CD into your computer's CD-ROM drive. Open iTunes. After your computer reads the CD, it should appear as an icon in the "Source" list.

2. Click on the icon for the CD to display its contents.

3. Click the "Import" button in the top right to add all the tracks. Alternatively, drag and drop individual tracks into your library.

Import Files From Your Hard Drive

4. Click on "File," and then "Add to Library."

5. Locate audio files on your hard drive. Select one and click "Open" to add it to your library.

6. If the file format is incompatible with iTunes, iTunes will ask if you want to convert it. Click "Yes" to begin conversion. You will hear a sound when the conversion ends.

Import From Your iPod

7. Connect your iPod to your computer.

8. Click your "iPod" icon. This brings up the "Summary" screen. If the screen doesn't appear, click the "Summary" tab.

9. Select the "Manually Manage Music or Enable Disk Use" option.

10. Minimize iTunes on your desktop.

11. Open up "My Computer."

12. Click "Tools" and select "Folder Options." Click the "View" tab.

13. Select the "Show Hidden Files and Folders" option under "Advanced Settings." Click "Apply to All Folders," and then click "OK."

14. Bring up iTunes again.

15. Click on "File," and then "Add to library."

16. Browse to "My Computer" and find your iPod. It should appear as if it is an external hard drive.

17.Open up the "iPod Control Folder."

18. Open up the "Music" folder. Examine the contents of your iPod. The filenames will look jumbled, but if you let your mouse cursor hover over a file, the song information will appear.

19. Select a song and click "Open."

Tags: your computer, your iPod, Click File, Click File then, click Open

Transfer Cell Phone Photos To A Computer

Transfer and store your cell phone photos onto your computer.

Cell phones double as digital cameras. In 2011, just about every cell phone can take pictures, and most can take live video. Transferring those photos (and video) off of your cell phone is just as easy as transferring the photos off of your digital camera. Once on your computer, manipulate your photos with your photo editing software and share with your family and friends.

Instructions

1. Turn on your computer and allow it to boot up.

2. Grab your cell phone and plug the USB cable into the slot on your phone.

3. Plug the USB cable into your computer. The slot to enter the USB is usually either on the side and/or back of your computer.

4. Enter your cell phone's password on your phone to unlock your phone (if necessary), and activate your phone's USB storage drive. Usually a notification pops up on your phone allowing you to turn on your USB storage directly from the notification window.

5. Click to open the pop-up window that appears on your computer as a disc drive.

6. Locate your phone's storage folder. It might be labeled Blackberry or iPhone, or it might be a Google or Android disk drive. Click on your phone's storage folder to open it and view the contents.

7. Locate your phone's folder that is usually labeled "Camera" or "Pictures." The folder's name will vary depending on your phone's model. This folder might be a sub-folder to a main one, so browse until you find it.

8. Drag and drop your cell phone photos onto your desktop, or create a folder to drag your pictures into.

Tags: your phone, your computer, your cell, your cell phone, cell phone, cell phone

Reload A Magnetic Digital Photo Frame

The advent of the digital picture frame has brought about a revolution in sharing photographs that sends the old laminar-style photo albums the way of the proverbial dinosaur. With the wide range of sizes and styles also come a wide range of methods for loading or reloading your images onto the frames. The three most-used methods of data transfer to these digital picture frames are: PC-to-USB, SD or MICROSD media card to frame and USB thumb-drive to frame.

Instructions

PC to Frame USB

1. Turn on both digital photo frame and the PC computer.

2. Connect a USB cable to the computer's USB port and then connect the other end to the digital photo frame.

3. Watch your computer screen for notification that your operating system has found, and recognized, your digital frame device. Most digital frames will cause an icon to appear on the computer's screen desktop.

4. Go to the location on your computer where you have your digital photographs installed. Select the photographs you desire to transfer and then, using your mouse, drag the photos onto the digital picture frame icon on your computer's screen desktop and drop them onto the icon.

5. Right-click on the digital picture frame's icon on your computer's screen desktop and select "Safely Remove" or "Safely Disconnect" to disengage your digital frame from the computer after your photos have been transferred. Unplug the cable from both devices and store until the next use.

SD or MICROSD Card to Frame

6. Locate the media card insertion slot on your digital photo frame, if it has this type of slot, and note the label next to, or under, the slot. The labeling will describe the type of media card slot your digital frame accepts. If your frame's slot is SD but you have a MICRO-SD card, install your MICRO-SD card into the SD card adapter.

7. Turn the digital photo frame off and gently insert the media card into the card slot until you feel it "click" into place.

8. Turn your digital photo frame on and consult with your digital frame owner's manual for instructions in transfer photos from your media card to your type of frame.

9. Turn the device off before removing the media card after the photos have been transferred from your media card into the frame.

USB Thumb Drive to Frame

10. Turn your digital photo frame off and insert your USB thumb-drive into the USB socket until seated firmly in place.

11. Turn the frame on and consult with your frame's owner's manual for instructions on transferring photos from your USB thumb drive to your type of digital photo frame.

12. Turn the frame off and unplug the drive from the frame once you have transferred your photos from the thumb-drive into the frame.

Tags: your digital, media card, photo frame, digital photo, digital photo frame, computer screen

Register A New Sim Card

If you order or sign up for cell-phone service online or through a phone, chances are you will need to register the Subscriber Identity Module (SIM) card that comes with it. The SIM card provides information to the phone that allows it to connect to the network you are using. Before you use your phone, you'll have to set up the SIM card.

Instructions

1. Determine your phone carrier's method for registering the SIM card. The most typical way to register a SIM card is online via a website, but some service providers may have you call an 800 number to register the phone.

2. Get the IMEI number of the phone that the SIM card will be used by. You can find this by looking in the back of the phone where the battery is, or by dialing #06# on the phone.

3. Point your browser to the website listed in the starter kit, or call the number listed.

4. Provide the company with information that might include your name, activation code number, IMEI number, address, home phone number or e-mail address. Your SIM card should then be activated and ready for use.

Tags: call number, IMEI number, phone that, your phone

Minolta 5d Repair Tips

If you have recently acquired a used Minolta 5D, an inspection or light repair work may be necessary.

The Minolta 5D was a digital single lens reflex (DSLR) camera produced by the Konica Minolta company in 2005. It sold well and was highly regarded by amateur and professional photographers upon its release. Although the 5D is about five years old, it can still produce acceptable results if it is in good repair.

Troubleshoot Your 5D

Troubleshooting a Minolta 5D, or any camera, involves thoroughly using each available function, setting and menu. For example, a series of underexposed photos may be a symptom of a damaged or dirty light sensor. Troubleshooting allows you to assess exactly what is wrong with the camera and will make seeking repair services (or doing the repairs yourself) much simpler.

Consult Your Manual

The owner's manual for the 5D contains helpful information regarding common issues that are easily fixed, such as the use of an incorrect lens or a dirty viewfinder. Often times these small issues are incorrectly diagnosed as problems requiring repair, when they can be corrected quite easily.

Assess Your Ability

Although repairing your own camera can be a rewarding process, it is generally not recommended for those unfamiliar with the internal anatomy of DSLRs. Depending on the severity of the issue and how important your Minolta 5D is to you, professional repair should be reserved as an option.

Tags:

Troubleshoot Yaskawa & Omron Ac Inverters To Board Level

An AC inverter is a type of drive control, or variable-frequency drive, that is used to control the rotating speed of an alternating current-controlled electric motor. The Yaskawa & Omron inverter was manufactured from 2003 until 2009, when the two companies worked together in this joint venture. The AC inverter, which is commonly used in ventilation systems of large buildings, controls AC motor speed, the frequency of the electrical power supplied to the motor. Troubleshooting the inverter at board level involves disconnecting it and inspecting the circuits inside.

Instructions

1. Check the circuit breaker that the inverter is connected to first. Make sure the breaker is flipped in the right direction. If it is not, flip it to the "On" position and power the inverter up to check it.

2. Shut off the power to the circuit breaker to which the inverter is connected if the circuit breaker appears to be working OK.

3. Remove the screw on the front cover of the inverter box with a Phillips screwdriver. Open the inverter box cover.

4. Inspect the electrical wiring terminals at the bottom of the inverter. Make sure all electrical wires running from the wall are connected. If they are not, loosen the terminal screw inside the box with a screwdriver. Wrap the wire around the screw and tighten it down.

5. Remove the electrical wires from their respective terminals if they are all connected adequately, but the unit will not work.

6. Remove the four mounting screws holding the unit to the wall or ventilation panel with the Phillips screwdriver.

7. Place the inverter on a flat table or work bench and remove the casing screws to access the circuit board inside the inverter.

8. Examine the voltage rating on the inverter power supply, which is square and mounted on the top right hand side of the circuit board.

9. Turn the multimeter on, set it to voltage and test the power supply by placing the test leads to each end of the power supply leads. If the voltage on the meter reads lower than the voltage printed on the power supply, it needs to be replaced. To do this, desolder the old power supply solder connections. Remove the old power supply and then solder the new one into place.

10. Inspect all other electronic components visually if the power supply tests OK. Look for carbon scoring or other visible signs such as discoloration or black scorch marks that may be a sign that a component short-circuited.

11. Heat the old solder connections of the damaged component with the soldering iron and pull the damaged component from the inverter's circuit board.

12. Purchase the same component new and install it in the inverter. Set the leads into the holes on the circuit board and solder them with solder and the soldering iron.

13. Reassemble the inverter box by replacing the screws and mount it back into position.

14. Connect the electrical wires to their respective terminals with the screwdriver and shut the inverter cover. Restore power to the inverter from the fuse box and test it by powering it up.

Tags: power supply, circuit board, circuit breaker, electrical wires, damaged component

Install A Zumo 550

Zumo 550 is a portable GPS device made available through Garmin. This unit was designed specifically for use with motorcycles. It contains such features as glove friendly touchscreen, high brightness, motorcycle fuel information and universal mounting. If you happen to purchase a Garmin Zumo 550, you will need instructions on install the GPS.

Instructions

1. Choose a spot on your motorcycle to mount the Zumo 550 that has close access to a power source. Place the handlebar base on this spot and secure it with the U-bolt, which should be wrapped around the handlebar of the bike. Use the included nuts to keep the base in place.

2. Attach the base plate and the mount of the Zumo 550. To do this, thread the flat head bolts and nuts that came with the universal mounting installation kit. You will need to line up the holes of the base plate with the holes of the mount. Once these two pieces are together, they are ready to be attached to the handlebar base.

3. Find the ball in the center of the handlebar base and the ball in the rear of the base plate. Slide both of these balls into the double socket arm of the Zumo 550. You can use the knob of the arm to adjust the tightness of the unit.

4. Plug in the power source of the Garmin Zumo mount. Place the Zumo 550 into the installed mount by flipping up the lever at the top of the structure. Once the Zumo 550 is in the mount, you can flip the lever down to secure the unit. If the unit seems loose, you can tighten the security screw just below the lever to adjust it.

Tags: base plate, handlebar base, Garmin Zumo, mount Zumo, power source, universal mounting, will need

Parts Of An Slr Film Camera

Whether basic or digitized, SLR cameras have similar parts.

Film cameras vary in complexity, but single-lens reflex cameras all have the same basic structure. Newer and more expensive models may have digital panels to replace knobs and rings that would physically change settings. However, most all have manual controls and exchangeable lenses that make them an excellent choice if you want to move beyond the amateur level of photography.

Film Pressure Plate

The film pressure plate is located on the inside of the back door of the camera body. It holds the film on a flat plane so that you can properly focus the images. You should not ever touch the plate; as the film moves across it, foreign particles on the surface can cause scratches.

Shutter Curtain

You can see the shutter curtain when the camera back is open. The shutter is made of multiple "leaves" and opens for a set amount of time to let light into the camera and make an exposure. Some 35-mm shutter curtains open from left to right, while others open from top to bottom.

Viewfinder

The viewfinder is located in the center of the camera body for an SLR. An SLR's viewfinder gives an accurate representation of what will be in the photo due to the series of mirrors, called a pentaprism, that are in place to show you exactly what the lens sees.

Lens

SLR cameras usually have a detachable lens that is composed of multiple pieces of glass that focus the image. You can focus the lens by hand by turning the front ring on the lens. More advanced cameras have autofocus, which you can access by half-way tapping the shutter release button. Lenses may be fixed, meaning they use just one focal length, or may be a zoom, which allows you to choose from multiple focal lengths by turning the zoom ring.

Aperture Ring

Aperture rings are present on some models of SLR camera lenses; they are located closest to the camera body. They allow you to choose the width of the diaphragm that lets in light, which affects how much of the depth of your image is in focus. Other camera models provide aperture controls through the digital display panel, which you can access by turning a dial and choosing from number settings of f/2 to f/22, for example.

Shutter Speed Dial with ISO

SLRs may have a dial on top of the camera body that lets you select a shutter speed. Often housed within the shutter speed dial is an ISO selector that lets the camera's light meter know what speed of film you are using. Camera models with digital display panels also have a dial for shutter speed, where you pick from slow shutter speeds like 1/15 of a second to fast ones, such as 1/2000 of a second.

Shutter-Release Button

All SLRs have a shutter-release button that allows you to make the exposure. Some types are hollow in the center so you can add a cable release. This lets you make an exposure without touching and potentially moving the camera.

Film Advance Lever

Basic models of SLRs have a film advance lever that you must push to advance the film after each exposure. If you don't advance the film, the shutter-release button does not function. The lever stops moving when you have reached the end of the film.

Rewind Release Button and Rewind Crank

Some 35-mm cameras must be rewound manually, and make use of a rewind release button on the underside of the camera body. Once you press it, you can rewind the film with the rewinder crank, located on top of the camera body.

Tags: camera body, cameras have, make exposure, shutter speed, SLRs have, that lets

Use Windows Scanner And Camera Wizard

This is the screen that appears when computer detects media.

Let this be your guide to using Windows to download photos into My pictures right from your camera or memory card from your camera. It is not as difficult as it seems and you can set it up to use Windows Scanner and Camera Wizard each time you have new photos you want to download onto your computer.

Instructions

1. Decide which photos you need to transfer to your computer and then collect accordingly from your digital camera to prepare to use Windows Scanner and Camera Wizard.

2. Connect your USB cable from your camera dock or directly from your camera to your computer. Another option is to insert your media card from your camera into your memory card reader on your computer or printer.

3. Look for a dialog to appear when the media card is inserted or the USB cable is connected to your computer. You will see a list of choices on your screen. Check the always use this program box on the bottom when you click scanner and camera wizard.

4. Select copy the photo or scans to a folder on my computer. This is sorted by date and then labeled by event. Organization is key to finding photos later on.

5. Check the boxes of photos to download using Windows Scanner and Camera Wizard. Be careful not to download ones you already completed. Your media card and computer will not know the difference and will create duplicate copies.

6. Keep clicking on next until you finish. It may take several minutes to complete the Scanner and Camera Wizard process.

7. Select your final choice from Windows Scanner and Camera Wizard. You can always delete the photos right in your camera. You do not have to use the Wizard to do this. You are only limited by the amount of storage space on your media card. Most like you will choose, nothing, I am done with these photos and the screen will exit.

Tags: from your, Scanner Camera Wizard, your camera, from your camera, Windows Scanner, Windows Scanner Camera, your computer