Compare Mini Projectors

The options, connector types and prices are all important to examine before purchasing a mini projector.

Mini projectors are small, portable and powerful presentation tools for any frequent traveler. The options, connector types and prices are all important criteria to consider when deciding which mini projector to purchase.

Determine The Options Each Projector Has

Similarly priced mini projectors have different options and capabilities. Some of these options may not be useful to you, but others can add significant convenience. These options include being able to use micro SD cards and wireless connectivity to the Internet.

Evaluate the Connector Types of the Mini Projector

Some mini projectors will come with a 19-pin plug to connect to your computer. Others will use red, yellow and white RCA cables to transmit the audio and visual signals from the computer to the mini projector.

Compare Similarly Priced Projectors

You can narrow your choice of mini projectors by determining what will fit within your budget. Mini projectors have a varied price range depending on the features and capabilities that come with it.

Tags: come with, connector types, connector types prices, mini projector, mini projectors, options connector

Troubleshoot Problems With A Sony Handycam

The Sony Handycam is a model of hand-held digital video recorder that allows you to record video and still images to a DVD to watch in a home DVD player or a flash card to convert videos to your computer. Just like with any other piece of electronic equipment, you may come across problems while you are attempting to use the device. Follow the troubleshooting steps to attempt to resolve your issues without contacting Sony.

Instructions

1. Place the battery for the device onto the charger for an hour and replace it in the Handycam if it will not turn on. If you are still not receiving power, remove the battery again and make sure it is inserted into the charger properly and that the charger is connected securely to a working outlet.

2. Remove the battery from the charger after another hour and replace it in the Handycam. If the device still will not turn on, press the "Reset" button on the back of the camera with a paper clip or other thin object and attempt to turn on the device again. If you receive no power, there may be a hardware problem with the battery, charger or camera. If the device turns on for a limited amount of time, you may need to replace the battery.

3. Press the "Menu" button to access the menu for the device and use the navigation arrows to move to the "Remote Control" option. Select the "ON" option by pressing the "OK" button if the remote control is not working. If the remote still does not work, open the cover on the back of the remote and replace the battery. If it still does not work, make sure there is nothing obstructing the infrared sensor on the remote. If this still does not work, there may be a hardware problem with the remote.

4. Ensure that the DVD you have inserted into the device is a blank DVD + or - RW disc and that it is inserted correctly, if you are having recording troubles. If you are trying to save to the memory card, ensure the card is pressed into the device fully and in the correct position. If these things are correct, you may have a hardware issue with the Handycam.

Tags: does work, still does, still does work, hardware problem, hardware problem with

Zoom In On Your Homemade Fisheye

Zoom past the vignetting in your homemade fisheye lens.

A homemade fisheye lens is a cheap alternative to the costly ones produced by camera and optics manufacturers. While the image quality can't compete with a professional lens, the homemade fisheye is a fun way to experiment with a wide, distorted field of view. The fisheye effect is created by attaching a door peephole viewer to the lens of a point-and-shoot or DSLR camera. This combination causes vignetting, or dark, blurry corners in the resulting image. By zooming in slightly, you'll be able to reduce vignetting and increase image quality.

Instructions

1. Attach your homemade fisheye to your camera. Depending on the construction of your fisheye and the type of camera you're using, electrical tape may be required for mounting. Avoid covering any part of the lens, LCD screen or menu buttons if you use tape.

2. Power on the camera and switch it to your desired shooting mode, such as landscape or portrait. Preview your field of view using the LCD screen.

3. Zoom in until the vignetting begins to disappear out of the frame. On point-and-shoot cameras, push the collar around the shutter button clockwise to zoom in. On DSLR cameras, rotate the zoom ring on the lens barrel until vignetting recedes.

4. Take several test shots and adjust the zoom until you reach the desired effect.

Tags: homemade fisheye, field view, fisheye lens, homemade fisheye lens, image quality, lens homemade

Spy Camera Laws For California

Spy cameras cannot be used unless the person being photographed is aware of them.

Spy cameras are defined as hidden cameras on private property with the expressed use of recording individuals without their knowledge. Surveillance cameras on the other hand are different in that the camera must be visible. Some states allow the use of spy cameras, and others do not; California and 12 others states do not allow spy cameras.

Spy Cameras

According to wecusurveillance.com, California and 12 other states "expressly prohibit the unauthorized installation or use of cameras in private places." The use of a spy camera is permissible if those being recorded are aware and consent to that fact. A private place is anywhere a person may expect to not be recorded. For example, a bathroom or bedroom are examples of where a person may expect not to be recorded. In short, if a person does not know that he or she is being recorded in California, then the use of a spy camera is illegal.

Surveillance Cameras

Surveillance cameras are somewhat different. Spy cameras are meant to be hidden, while surveillance cameras are generally placed in locations that are deemed public or not seen as an invasion of privacy. For example, someone with a large plot of land may choose to put cameras on the property to monitor it. They are allowed to do so. Those entering the property without permission of the land owner are breaking the law and are not entitled to the same privacy protection laws as guests of the owner. Guests of the property owner should be informed that video surveillance is being conducted on the property.

Consequences

In most states that outlaw spy cameras, being caught using one can be "punishable by a $2000 fine and up to 2 years in prison," according to wecusurveillance.com. Further charges can be assessed if the spy camera is being used as an invasion of privary such as in a change room, locker room, or bathroom. Additional charges may also be filed if the spy camera is being used for an illegal activity; for example, if the spy camera's footage will be used for blackmail or extortion.

Tags: allow cameras, being recorded, being used, camera being, camera being used, cameras private, expect recorded

Troubleshoot A Minolta Dimage S414

Digital camera

The Minolta Dimage S414 is a compact digital camera originally released in 2003. The S414's specifications include a 4.0 megapixel CCD, 4x optical zoom, 2.2x digital zoom, four levels of ISO sensitivity and a maximum image resolution of 2272 x 1704. The camera is designed for ease of use, but certain situations may require the use of specific settings in order to achieve the best results. If your Dimage S414 ceases to function as desired, you may be able to locate and resolve the underlying issue with the help of a few troubleshooting procedures.

Instructions

Focus

1. Examine the two LED lights located next to the camera's viewfinder; if the top LED is lit red, this indicates that your image is out of focus.

2. Estimate the range between yourself and your subject. Examine the top of the camera and locate the button next to the LCD screen. If you are less than two feet from your subject, press the button until the image of a flower appears on the LCD screen. If you are taking a picture of a landscape, press the button until the image of a mountain range appears. Otherwise, press the button until the image of a face appears.

3. Take a test picture with the new focus settings. If problems persist, point the camera at a different object that is the same distance from you as your original subject. Hold the shutter button halfway down until you see the focus information appear on the bottom of the camera's rear LCD screen. Point the camera back at your original subject and press the shutter button the rest of the way down to finish taking your photograph.

Image Quality

4. Turn the camera's mode dial to the "AUTO" setting. Press the "MENU" button, located to the right of the camera's rear LCD screen.

5. Use the up and down navigation buttons to select the option labeled "Image Size." Press the confirmation button (located in the center of the navigation buttons). Adjust the image size to a larger setting and press the confirmation button. Return to the settings screen, select "Quality" and press the confirmation button. Select "Fine" or "TIFF" and press the confirmation button.

6. Return to the settings screen and use the navigation buttons to select the option labeled "Digital Zoom." Press the confirmation button and examine the current settings; if digital zoom is enabled, use the navigation buttons to select "Off" and press the confirmation button. Press the "Menu" button to exit the settings screen.

"Err" Message

7. Set the mode dial to the "OFF" position. Disconnect the AC adapter, if attached. Examine the bottom of the camera and locate the battery-chamber door. Slide the door towards the outside edge of the camera and flip it open. Remove the installed batteries.

8. Wait for "Err" message to disappear from the camera's display.

9. Replace the batteries and slide the battery-chamber door back to the locked position. Reconnect the AC adapter, if desired. Turn the mode dial to the "AUTO" setting.

Tags: confirmation button, navigation buttons, press confirmation button, button until, button until image, buttons select, Dimage S414

Troubleshoot A Memory Stick Pro Duo

Peripheral memory card readers, like this one, must be used with an adapter and cannot read the singular Memory Stick Pro Duo.

The Memory Stick Pro Duo is a proprietary format that is associated with Sony brands. Although Memory Stick Pro Duo is primarily manufactured by Sony, other, third-party companies like SanDisk also manufacture Memory Stick Pro Duo memory cards. No matter where these memory cards are manufactured, if you are having trouble getting your Memory Stick Pro Duo to work with your device, there are some simple troubleshooting steps you can take.

Instructions

1. Use the adapter. One of the unique features of the Memory Stick Pro Duo is its adapter. The memory card is rather small, but the adapter that comes with it allows it to connect to larger ports--specifically ports on a computer. If you are using a peripheral memory card reader for your computer, you also need to plug the Memory Stick Pro duo into it's adapter for the computer to read it correctly.

2. Ensure that write protection is turned "Off." On the Memory Stick Pro Duo, there is a small switch with an arrow on it. If the switch is in the position for write protection, no data will be saved to the card. Simply pull the switch in the opposite direction to disable write protection.

3. Re-format the memory card. Insert the Memory card into the device you want to use it with, and then power it on. If you are using a digital camera or media player, simply insert the Memory Stick Pro Duo into the device and then power it on. If the device permits, enter the memory card utility and select the "Format" option. If you need to format the card using a computer, go to "My Computer," highlight the card, right-click, and select "Format" from the menu.

Tags: Memory Stick, memory card, write protection, into device, memory cards, Memory Stick into

What Is A Light Meter

What is a Light Meter?

Photographers capture light rather than the subject from which light reflects. A light meter measures a subject's luminosity by gauging either reflective light or by incident light methods. Light meters measure either reflected light or incident light. All light meters provide settings that equalize light values to middle gray.

Significance

Without an indication of a subject's brightness, a photographer cannot know what camera settings to use. Light meters measure the intensity of light that falls upon or reflects off of a subject. A photographer uses a light meter's exposure settings to adjust aperture and shutter speed. The information provided by a light meter is used as a factor to determine the lightness and darkness of a final print. The brightness value supplied by a light meter is not the same as an evaluation of a subject's lightness or darkness.

Types

There are two types of photographic light meters. Reflected-light meters measure how much light reflects from a subject. In-camera light meters are of the reflected-light variety. Hand-held meters can measure reflected light as well. Reflected-light spot meters determine exposure settings for light reflecting from specific areas rather than larger areas. Incident-light meters are always hand-held and measure the brightness of light that falls on a subject. Some meters are three-in-one, with reflected-light, incident-light, and spot meter functions.

Function

For either type of light meter, the initial step is to set the film speed into the meter. To use a reflected-light meter, either point the camera (in-camera meter) or the hand-held meter at the subject area. Obtain measurements for all areas of a subject. To use an incident-light meter, stand near the subject and point the meter at the camera. Use of incident-light meters is limited to subjects that are lit by an identical light source. It is difficult to use an incident-light meter when determining exposure for distant scenes.

Benefits

Photographers use different light meters depending upon subjects, such as landscapes or portraits, and depending upon the photographer's creative purpose. Reflected-light meters are most commonly used and provide exposure information for subjects with complex lighting. Incident-light meters indicate exposure that will apply for all areas of a scene. They also work well in controlled lighting situations.

Considerations

Light meters are calibrated to give exposure settings based on middle gray of the photographic gray scale. The exposure provided by a light meter is a starting point. If, for example, a photographer wants to capture the depth of a dark crevice in a sea cliff on a bright day, he must adjust aperture and shutter speed to create darkness and dimensionality. The photographer will use the light meter's reading to determine camera settings necessary for darker exposure. The same is true for especially light subjects. If one wants to communicate the ethereal glow of a mountain lit by the rising sun, one will adjust camera settings from the exposure provided by a light meter to expose more light to the film. Another consideration is that people normally see reflected light. Reflected-light meters give the best measurements for accurate representations of a subject or for a "normal" light measurement from which to begin the creative process.

Tags: light meter, meters measure, camera settings, exposure settings, light meters, Light meters

Troubleshoot A Magnavox Digitaltoanalog Tv Converter Box

A Magnavox digital-to-analog TV converter transforms broadcast television signals for playback on older TV sets. Coaxial cables connect the box to an antenna and to the TV with metal couplers on the end of each cable. The box is designed to tune stations automatically using the supplied remote control. If you have difficulty picking up stations or the box is not operating normally, try troubleshooting the unit before sending it off for repairs.

Instructions

1. Tighten the metal rings that connect the coaxial cables between the antenna, the Magnavox converter and your television. A loose connection can prevent the signal from getting through.

2. Set the TV to channel 3 if it isn't already.

3. Turn off the power to the converter box using the switch on the right side of the unit, then unplug the power cord from the wall outlet. Wait five minutes, then plug in and turn on the converter box. This resets the unit.

4. Press "Standby-On" on the Magnavox remote control.

5. Press the triangular up or down button to highlight "Autoscan," then press "OK" to reprogram the Magnavox with the available channels.

6. Use the Magnavox remote control, not the TV remote, to change channels.

Tags: remote control, Magnavox remote, Magnavox remote control

Transport Speedlights In A Bag

Travel to remote shooting locations can endanger your photographic equipment.

Cameras produce photographic images by exposing light to a light sensor or light-sensitive medium. Therefore, if you don't have enough light, you can't produce an image. Portable flashes, like the Nikon Speedlight series of shoe-mounted flashes, provide an artificial light source available in any shooting scenario. Transporting your Speedlights can present all sorts of potential dangers to your flashes. Speedlights can take a lot of abuse, but a few basic precautions can save them from unnecessary damage during transport in a bag.

Instructions

1. Insert the Speedlight into its carrying case. Use a case that shuts firmly and completely closes the flash away from the elements.

2. Insert the Speedlight in its case into a pocket in the inner wall of a camera bag. Use a pocket with a zipper or hook-and-loop closure to secure the flash in place during transport.

3. Seal the pocket using its zipper or hook-and-loop closure. Repeat with all remaining Speedlights.

Tags: zipper hook-and-loop closure, during transport, hook-and-loop closure, Insert Speedlight, zipper hook-and-loop

Troubleshoot A Hp Photosmart C4180

The HP Photosmart C4180 is part of Hewlett-Packard's line of all-in-one devices. It can print, scan and copy documents and also can be used as a photo printer. It prints 30 pages per minute and can accept memory cards for photo printing. Before contacting HP about any printing problems you have with the Photosmart C4180, you can troubleshoot the printer on your own.

Instructions

1. Reinstall the software program that came with the HP Photosmart C4180. Installation issues often can be resolved this way. To do this in Windows, uninstall the old program through the "Add/Remove Programs" menu. Insert the CD-ROM that came with the printer and follow the on-screen instructions to complete the reinstallation.

2. Update your printer drivers. An outdated driver can cause problems during printing and can be resolved easily by checking the HP website for new drivers available for download.

3. Check the USB cable between the printer and your computer for a loose connection. You also will want to make sure the printer is getting power. If your document fails to print, try unplugging and plugging in the USB cable and power supply. You also could try connecting the USB cable to another port.

4. Check for paper jams and make sure the paper tray is loaded. Also check for proper installation of the ink cartridges.

5. Print a self-test report. To do this, press "Setup" on the printer interface and then scroll to the "Print Report" option before selecting "OK." If the color lines on the report do not extend clearly across the page, you may need to replace the ink cartridges.

6. Restart your computer. Many printing issues with the Photosmart C4180 can be resolved by restarting your computer and allowing it to recognize the printer at startup.

Tags: Photosmart C4180, with Photosmart, with Photosmart C4180, your computer, came with

Diy Drum Triggers

Drum triggers are basically glorified contact microphones that are usually mountable in some fashion. In this article, we will discuss the basic components necessary for making your own drum trigger and we will briefly mention possibilities for building housings for them. The goal is to outline the basics so that you will be equipped to design the perfect drum trigger for your needs. Triggers can be as small as a piezo mic or as large as a gong. They don't even have to look like drums, so the design is really up to you.

Materials

To build your own drum triggers, you will need a few basic materials, the most important of which are piezo transducers. These can be secured at Radio Shack (part number 273-073). You'll also need a some shielded phono jacks, a soldering iron and solder, epoxy, and some thin plate metal and metal shears.

Construction

To create the trigger, you first need to remove the piezo transducer from the plastic casing it comes in. You can pop the plastic cover off with a knife or screwdriver. Be especially careful to not damage the piezo while doing this. Remove all of the plastic casing and you will have the bare piezo, which is what you need.

Next, use the shears to cut a circular disc out of the plate to create the surface you will strike, or the head of the pad. This can be whatever size you like, but many who have done this project use the heads from an old electronic drum set or plastic pad. However, with a little ingenuity you can turn any old drum rim into a nice pad.

Use a portion in the center of the disc slightly larger than the piezo to create a textured surface for the epoxy to bond to. Cover the brass bottom side of the piezo with epoxy and stick it to the bottom of the plate. Be careful not to damage the piezo when pushing it down onto the surface.

Now solder the red and black wires from the piezo to the connection on the phono jack. At this point, the trigger is essentially functional, but it will serve you much longer and much better if you house it in something. A simple housing can be made out of wood and foam, or, as mentioned before, an excellent and very effective housing can be constructed out of an old electronic drum pad if you can find some used or broken ones. How you choose to house the trigger is up to you and depends on what is more convenient for your setup.

Tags: careful damage, careful damage piezo, damage piezo, drum trigger, electronic drum

How Is A Digital Alarm Clock Built

Digital clocks display the time electronically.

Definition

A digital clock is technically only a clock that displays the time in a digital fashion instead of an analog fashion. That means that instead of using hands that circle around a face of a clock, the numbers are displayed using simple lighting technology. There are analog clocks that use electronic systems to control the hands, but far fewer digital clocks that use analog systems--in almost all cases, digital clocks use electronic components that accomplish the same tasks.

Display

When a digital clock is being manufactured, one of the most important parts is the face plating of the clock itself, which shows the numbers. These small faces are either made of LED or LCD. LCD, or liquid crystal displays, use crystals suspended in a fluid solution that can refract light in specific ways to create different colors (usually just one color, in a digital clock). The display itself can either be a complex dot-matrix arrangement that allows for more detailed numbers and pictures, or a seven-segment display, which is a composition of seven LCD bars that can be turned on or off in different segments to create a number 1 through 9. LED clocks use light-emitting diodes that radiate light instead of simply refracting it, leading to brighter displays and a much wider range of colors.

Other components

Once the display plate is made, it is combined with the other components, including the battery or charging system. A digital clock needs access to a continual source of power, so it is equipped with either a simple battery or battery compartment, or an AC adapter that can be plugged in to receive power from the household. If a digital clock is designed to be plugged into the wall, it can use the 60-Hz oscillations present in AC power to measure time using a digital counter that measures each hertz as it passes by to figure out the seconds. Digital clocks without adapters use a crystal oscillator (a crystal subjected to a current) that is more accurate.

To control the power flow to the display, different types of gating circuits are installed to direct the current to different segments of the clock, as directed by the counter. Other necessary types of electronic devices are also installed, including a bridge rectifier, a volt regulator, capacitors and resistors to manage the flow of the current.

Tags: digital clock, clocks that, different segments

Convert Old Store Bought Video To Dvd

Video cassettes have essentially become a thing of the past, completely obsolete in the wake of DVDs and even newer Blu-ray discs. If you have some VHS tapes you purchased in video stores before the late-1990s, you may be at a loss what to do with them, since VHS players are pretty much a dead technology. However, with a little ingenuity, you can convert those VHS tapes to DVD, using a variety of methods.

Instructions

Using an External DVD Burner

1. Make sure the VCR and external DVD burner are both hooked up to power sources (most likely a typical power outlet) and are near enough to each other that a video cable can connect them.

2. Connect the VCR's video/audio outputs, which are typically found on the back of the device and are color-coded yellow (video), white (audio) and red (audio), to the video inputs of the DVD burner, using the RCA video/audio cable.

3. Insert the cassette you wish to record to DVD into the VCR and a blank DVD disc into the external DVD burner.

4. Press "Burn" on the external DVD burner, or whichever button begins the burning process. (You may need to consult the owner's manual to your DVD burner for instructions specific to your model.)

5. Press "Play" on the VCR. The video will begin streaming through the cables to the DVD burner, which will burn it to the blank DVD.

Using a Computer

6. Insert the video capture card into your computer's PCI card slot and install any software that came with it.

7. Connect the VCR's video/audio output, which is typically located on the back, to the video/audio input of the video capture card using an RCA video/audio cable.

8. Run the capture card's software, which should record the images entering the card through the RCA cables.

9. Insert a video cassette into the VCR and a blank DVD into the computer's DVD burner. As the tape plays, the capture card and software will convert the video into a digital file.

10. Add the newly created digital file to a DVD and burn it using DVD-burning software, which is usually provided on your computer.

Tags: video audio, capture card, audio cable, capture card software, card software, Connect video

How Dvr Works

Basics of DVRs

A DVR, or digital video recorder is the modern equivalent of a VCR. DVRs digitally record movies, TV shows and other videos. DVRs have high-capacity built-in computer hard drives which can store many hours of video and can erase and record over data almost indefinitely. DVRs can come with TiVo or another service which they are designed to work with. They can automatically record programs from that service for later viewing.

How it Works

Different DVRs receive their digital signals from different sources. Depending on the service, the DVR receiver might get a signal from a conventional cable, fiberoptic cable or satellite dish. If you set the DVR to record while the TV is on, the receiver automatically divides the signal into two. One signal is turned into an image which is displayed on the TV screen, along with a soundtrack played on the speakers. The other signal is written directly onto the hard drive of the DVR. When you want to watch the program again, the hard disk reads the stored signal and turns it back into video and audio for your television. DVRs also have timers which allow the user to cue the DVR to record a particular show. When the timer goes off, the hard drive switches to the preset channel and records the incoming signal until the timer automatically turns it off again.

Other Features

There are several advanced features available on modern DVRs. Many DVRs can actually record one show while displaying another on the television. These video recorders actually have two tuners so one can record the show on one channel while the other displays the show on another channel. Another popular feature is the ability to pause live broadcasts. When the DVR user hits the pause button, the hard drive starts recording the broadcast. When the user hits play again, the DVR actually plays him the recording, while continuing to record the show as it comes in.

Tags: hard drive, record show, user hits, When user, When user hits

Troubleshoot A Dvd Burner

Burning a DVD appears to be a simple task. However, it can turn out to be a frustrating experience if you encounter minor problems. In such a situation, it works best to identify the problem and deal with it quickly. Here are some ways to troubleshoot your DVD burner.

Instructions

1. Determine the DVD format. Remember, DVD burners do not support discs for which they are not designed.

2. Check the surface of the disc. See if the surface is dirty or shows scratches. A dirty surface can be cleaned with a soft cloth. If the disc is scratched, try another disc.

3. Give a second try after rebooting your computer. Sometimes rebooting can resolve minor problems.

4. Ensure that "DMA" is enabled on your "IDE" channels in the "Windows Device" manager. DMA stands for Direct Memory Access, a feature that allows certain hardware subsystems within the computer to access system memory so that they may read and/or write independently of the CPU.

5. Uninstall any packet writing software installed on your PC. Some examples of common packet writing software are InCD by Ahead, DirectCD by Roxio and DLA by Sonic.

6. Verify that your hard drive has enough empty space. While burning a DVD, your hard drive temporarily sets aside the amount of space equivalent to the data being burned on the disc. If there is not enough space, identify unused or negligible files and delete them from the drive.

7. Defragment your hard drive. A fragmented hard drive can create issues during the DVD burning process.

8. Confirm that all connections are secured. Check the cables, particularly when you are making use of an external DVD burner.

9. Read the instruction manual for your burner. Common problems are caused by defective disc surfaces or lack of space on the drive. Also, a defect in the DVD burner may be the root of the problem.

Tags: hard drive, your hard, your hard drive, minor problems, packet writing, packet writing software

Use Single Use Contacts

Contact lenses are placed in the eyes to improve vision.

Contact lenses improve vision by altering the direction of light rays so they focus light properly onto the retina. Single use soft contact lenses are recommended by many eye care professionals as safer than extended wear contacts since they aren't in your eyes long enough to build up uncomfortable deposits of protein, calcium and lipids that can lead to eye infections. Designed and packaged for one-day use, single use contacts are inserted when you get up and thrown away before you go to sleep.

Instructions

1. Wash your hands thoroughly and dry them. Remove your contact lens from the case, and balance it on the forefinger of your dominant hand. Use a finger and thumb on your other hand to hold your eye open. Without blinking, insert the lens into your eye. Blink to help the lens settle in the proper place over your eye and allow it to focus. Repeat the process for the other eye.

2. Wear single use contacts for only one day. Wash your hands, remove the lenses, and place them in a contact lens case containing fresh solution before you swim to avoid eye infection or disease caused by microorganisms that live in water. Remove the lenses before you go to bed and discard them.

3. Use only the solution prescribed by your eye doctor. Never use water on contact lenses as it contains substances that can affect your eye. Follow the wearing schedule set up by your eye care professional. Replace your contact lenses at the correct time and keep your regular eye appointments as your vision can change. Replace contact lens cases every three to six months, and replace the solution in the case every day.

4. Call your eye doctor if you have any problems with vision or comfort. Single use contacts are medical devices that have to be properly fitted and prescribed by an optometrist or ophthalmologist who can determine a brand that works best for your condition. Problems that occur because of changes in your condition, human error or product defects must be addressed at once.

Tags: contact lens, contact lenses, Contact lenses, improve vision, Wash your, Wash your hands, your condition

Reasons For Switching To Digital Tv

Analog and digital television signals are broadcast using a portion of the electromagnetic spectrum that includes radio waves, known as the radio spectrum. The essential difference between analog and digital broadcasting is that the former transmits pictures and sound as a fluctuating wave, while digital broadcasting converts them to a string of binary digits or bits, which can have a value of "0" or "1," prior to transmission.

Digital Switchover

Digital television is more flexible than analog television because it can be received via digital terrestrial, digital cable, digital satellite and broadband. Full-power television stations in the United States have been broadcasting in digital format exclusively since June 12, 2009. By law, all new television sets must have digital tuners capable of picking up this signal. From the average television viewer's point of view, the main benefit of switching to digital television is that analog television is no longer available; however, you can still use your old analog television set to receive digital television programming by connecting it to a digital-to-analog converter box.

Picture and Sound Quality

Digital television allows broadcasters to offer improved picture and sound quality, including multi-channel digital surround sound, with less interference than analog television. Digital television also provides a range of interactive video and data services that are simply not possible with analog broadcasting. These enhanced features can include services for viewers with sight or hearing impairments, such as audio descriptions and subtitles.

Radio Spectrum

One of the main reasons for switching to digital television broadcasting was to create more space in the radio spectrum. The nature of a digital broadcast is that it can be compressed by computer processing and then occupies a fraction of the space in the radio spectrum required for an analog broadcast. In fact, up to eight digital television channels and associated services can be carried in the space required for a single analog television channel. The space vacated by the termination of analog broadcasting will now be used for emergency communications by police and fire departments, and some of it has been auctioned to companies providing wireless broadband and related services.

Multicasting

Digital broadcasting uses the radio spectrum more efficiently than analog broadcasting. This means that digital broadcasters can utilize a process known as multicasting to broadcast multiple standard-definition (SD) and high-definition (HD) programs rather than a single analog program. This creates a wider choice of programs and services for viewers. Switching to digital television upgraded the transmission network to the best available technology and eliminated the cost of broadcasting the same content simultaneously on analog and digital television.

Tags: analog television, analog broadcasting, digital television, radio spectrum, than analog, analog digital, digital broadcasting

Ringtones To A Tracfone With A Bluetooth

Bluetooth technology allows electronic devices to be connected to each other without the use of physical cables or a W-iFi connection. One such use for these is to transfer ringtones to cell phones for the prepaid cell carrier Tracfone. Being able to use your own ringtones allows you to personalize your Tracfone cell phone.

Instructions

1. Turn on your Tracphone's Bluetooth and set the phone on "discoverable mode." Refer to your owner's manual for instructions on do this.

2. Open "My Bluetooth Places" on the PC. You can find this in the Programs section of the start menu.

3. Click on the "Bluetooth Setup Wizard" file on the window that appears. The wizard should appear on your screen.

4. Choose the option that reads, "I know the service I want to use and I want to find a Bluetooth device that provides that service."

5. Select the "File Transfer" option. The Bluetooth wizard will then search for your phone.

6. Click on your phone once the computer finds it, then click the "Next" button.

7. Give a name to your Bluetooth connection. Make sure that "Start the Connection Now" is checked and click "Finish."

8. Find the ringtone you want to use on your computer.

9. Right-click on the ringtone. On the window that appears, click "Send To," then select "Bluetooth Device," and then select your Tracfone. Your ringtone should transfer to your phone.

Tags: your phone, that appears, then select, window that, window that appears

Choose Accessories To Prevent Dropping Your Cell Phone

One of the most frustrating experiences in the age of the cell phone is when you drop your phone and you have to wait for the crunch as it heads for the asphalt. Phones are slick, small and slide easily into your jeans pocket. That is a great feature unless you are trying to hang onto it. Here is choose accessories to protect your cell phone from being dropped.

Instructions

1. Buy a protective case. Almost every phone currently available has some kind of leather or plastic protective sleeve available to protect it against scratches and drops.

2. Buy a cell phone holster. You can buy a holster to clip on your belt, coat or purse which will conveniently and securely hold your cell phone while you're not.

3. Use a headset. Using a headset leaves the cell phone out of your hands and in your pocket, holster, backpack, etc. When you do not have it in your hands, you can not drop it.

4. Buy a car mount. You can add a suction mount to the dash of your vehicle which will hold your cell phone so you can talk on speaker phone or using a headset while you drive.

5. Buy a lanyard. You can purchase lanyards for cell phones which attach to the body of the phone. Just slip one end over your wrist and when you accidentally drop it, the lanyard will keep the cell from dropping.

6. Buy a larger phone. Phones have become smaller and smoother, when you do not mind having a larger phone, you can get one for less money and it will also be easier to hang on to.

Tags: cell phone, your cell phone, cell phone, hold your, hold your cell

Program A Mitsubishi Remote Control

Your Mitsubishi TV's remote control can be programmed to control other devices. You can program the remote to operate your VCR, cable or satellite source, DVD or audio system. This is particularly useful if you want to reduce the clutter of many remotes. The downside is that you have an extra button to press. Rather than just picking up a device-dependent remote, like the remote for your cable box and pressing the channel button, you have to press the cable-labeled button on the Mitsubishi remote and then the channel up-down button.

Instructions

1. Move the slide switch on the top of the remote to the position for the device you want to program. For example, CABLE/SAT.

2. Press and hold the power button on the remote for a few seconds. The button light will blink twice and then extinguish. Release the power button.

3. Enter the five-digit code for your cable or satellite box manufacturer (see Resources). The power button will blink twice when you start entering digits. The power button will flash each time you enter a digit. It will flash twice again when you have completed entering the code.

4. Move the slide switch to any other position.

5. Point the remote at the device and test.

6. Repeat with any further programming codes listed if steps 1-5 failed. Point the remote at the device and test.

7. Use Code Search if it still fails. Move the slide switch to the device's label.

8. Press and hold the power button for a few seconds until the button flashes twice and then goes off.

9. Press the digits 991.

10. Press the digit 1 if you are programming the CABL/SAT label, 2 for DVD/VCR and 3 for AUDIO.

11. Press the Channel Up and power button repeatedly until the device responds.

12. Press Enter to set the code.

Tags: power button, Move slide, Move slide switch, slide switch, your cable

Connect A Nokia E61 To A Computer As A Modem

The E61 is one of Nokia's first smartphones to use the Symbian operating system. It has a QWERTY keyboard, Bluetooth and Wi-Fi options. It also has the ability to edit documents and send email. If you want to use it as a modem to connect to your computer, you will need a data plan. This will allow you to surf the Internet from just about anywhere that you can get phone reception.

Instructions

1. Turn on your phone and go to the main menu. Go to the BlueTooth menu and turn it on. Click on "Make Phone Discoverable."

2. Boot up your computer and go to the "Control Panel" and click on "Add BlueTooth Device." Follow the instructions of the Bluetooth Installation Wizard. You will come to a window that lists all "Discoverable" devices in the area. Find your Nokia E61 in the window, highlight it and click "Next."

3. Type in the security code for the phone. If you haven't changed it, the default is usually "000" or "888." Click "OK" and "Finished."

4. Click on the Start Menu on your PC. Go to "Network," then "Network and Dial-up Connection." At the top it will say "Network and Sharing Center"; click on it. On the left side, click on "Set Up a Connection or Network."

5. Select "Set Up a Dial-up Connection." Type in a user name and password. You will need to get these from your cell phone service.

6. Enter the phone number. This will vary depending from carrier to carrier, but below are the numbers to a few US services.

Cingular/AT&T: *99***2# or *99# (try both).

Verizon: #777

Sprint: #777

7. Name the connection. Call it something easy to remember, like "Nokia E61," and click "Save."

8. Click on the connection icon and click the dial tab. Wait for about 30 seconds. Your phone will establish a connection to the Internet. When the connection is complete, open up the Web browser and surf normally.

Tags: Dial-up Connection, This will, will need, your computer

The Best Hd Compact Camcorders

Compact HD camcorders allow users to record high definition video in resolutions up to 1080p. Their compact design make them perfect for users on the go and the internal memory on these devices allows users to record hours of home video footage. Deciphering which compact HD camcorder is for you, however, can be a difficult process.

Flip Ultra HD

The Flip Ultra HD camcorder comes in two different models. The higher-end model has 8GB of memory and can record up to two hours of HD video at a time. It measures in at 4.16 inches-by-2.11 inches-by-0.88 inch. It also features a digital zoom, runs on a Flip Video lithium-ion battery pack and captures images at 60 fps at 720p resolution. The other model has 4GB of storage space and can record up to one hour of HD video at a time. It measures in slightly larger at 4.25 inches-by-2.19 inches-by-1.17 inches. That recorder also features a digital zoom, runs on two AA batteries and captures images at 30 fps at 720p resolution.

Kodak Zi8

The Kodak Zi8 captures images at 30 fps at 1080p resolution. It features 128MB of internal memory but also has an SD/SDHC expansion slot that supports SD memory cards up to 32GB in size. The device measures in at 2.4 inches-by-4.5 inches-by-0.9 inch. It features HDMI and AV output, a 2.5 inch display and runs on a KODAK Li-Ion rechargeable digital camera battery.

Kodak Playsport

The Kodak Playsport is a waterproof digital camera that can record image at 30fps and 1080p resolution under up to 10 feet of water. The device comes with 128MB of internal memory but it also has a SD/SDHC slot that supports memory cards up to 32GB in size. It can output video via AV or HDMI connections, features a 4x digital zoom, measures in at 2.3 inches-by-4.4 inches-by-0.8 inch and runs on a KODAK Li-Ion rechargeable digital camera battery.

Flip MinoHD

The Flip MinoHD camcorder comes in two different models: 4GB and 8GB. The 4GB model can record one hour of video at a time at 60 fps and at 720p resolution. The 8GB model can record up to two hours of video at a time at 60 fps and at 720p resolution. Both models measure in at 3.94 inches-by-1.97 inches-by-0.63 inch and run on an internal lithium-ion battery.

Sony Bloggie

The Sony Bloggie features a 3 inch touch screen LCD display and 8GB of built in flash memory. The device can record up to four hours of footage at 1080p resolution. It measures in at 2.12 inches-by-4.25 inches-by-0.62 inch. It features HDMI video output and a 4x digital zoom and runs on an internal lithium-ion battery.

Tags: inches-by-0 inch, 720p resolution, digital zoom, video time, 1080p resolution, captures images, digital camera

Program A Vcr With A Digital Converter Box

As TV stations switch over exclusively to digital high definition, older TVs will need a digital converter to work. This is only needed if you don't have cable or satellite TV. If you record TV shows with a VCR, this will still work with a converter box. You just need to make sure the signal goes through the converter before it reaches the VCR. It's easy to do if you know about hooking up devices like VCRs, and you can still program the VCR timer to record something later. If you want to record one channel while watching another, however, you must hook up two converter boxes.

Instructions

Basic Installation and Programming

1. Make sure the converter and VCR are properly connected. The converter's input must be connected to the antenna. Connect the converter's output to the VCR using either an RF coaxial, with the twist-screw plug, or RCA composite cable, with the yellow, red and white plugs. Connect the VCR's output to the TV set.

2. Set the VCR's clock to the current date and time. The Menu button on your VCR remote control will bring up an on-screen menu where you should go to the "Clock Set" selection. Follow the on-screen directions for setting the date and time--it should involve the directional keys on the remote.

3. Bring up the Menu screen again and go to the "Timer Set" selection. The process for presetting the start and stop times should be similar to the initial clock setting. You will also need to set the recorded channel and if you want to record in Short Play or Extended Play. Most VCRs will allow up to eight timer settings.

4. Insert a recordable, rewound cassette tape in the VCR and press the Timer button. The VCR will shut off and automatically start up at the preset time. As long as the digital converter's signal is going into the VCR, it should record the HD-converted channel.

Recording a Different Channel

5. Attach a coaxial splitter to your TV antenna. Connect two separate digital receivers to the splitter with coaxial cable. Attach another splitter to the TV's input port.

6. Link one converter directly to the TV using one of the available splitter ports on the TV. Connect the other splitter port to the VCR's output and the VCR's input to the second converter box.

7. Follow the above Basic Installation and Programming instructions for programming the VCR to record the right channel. It should pick up the antenna signal for that channel while the TV is playing another.

Tags: antenna Connect, Basic Installation, Basic Installation Programming, channel while, digital converter, Installation Programming

Improve The Picture Quality On Your Lcd Tv

Not satisfied with the quality of picture you're getting from your LCD TV? There are a number of settings to help you get the optimal performance from your LCD TV for watching movies, sports or broadcast television. You can also set it for gaming. Follow these steps to find out improve the picture quality on your LCD TV.

Instructions

1. Consult the user's manual on access the adjustments on your TV. There will be sections on resolution, color, contrast and brightness, to name a few. Pay extra attention to the troubleshooting section for specific examples of problems that you may be experiencing.

2. Consider checking the resolution of the television. Each LCD TV comes preset to a "native" resolution that's specific to that make and model. Consult the owner's manual for the resolution setting recommended for different types of viewing.

3. Adjust the contrast and brightness. The lighting in the room will have a dramatic effect on the picture quality of your LCD TV. If you prefer to watch in a darker room, consider softening the brightness a bit to reduce eye stress and fatigue. If the TV is in a bright room, you may want to tweak the contrast to allow for better definition of the darker areas of an image.

4. Check out whether or not the LCD TV has preset settings for watching sports, movies or concerts. For example, preset sports settings typically jack up the color and brightness to enhance features on the field of play; but if you watch a lot more movies than sports, you'll find that these settings don't enhance movie-watching. A simple fix may involve adjusting the preset viewing setting.

5. Consider buying high quality cables for your TV called "Monster Cables." These can be purchased at your local electronics store. The cables that came with the TV or other electronics will not provide the full spectrum of light and color that the LCD TV can produce.

6. Go online to look for tech forums specific to the make and model for further information. Bring up a search engine and type the make and model of your LCD TV into the window along with the words "tech forum" and browse the results. You'll likely find a topic on these forums that addresses the specific problem that you're experiencing.

Tags: make model, contrast brightness, from your, picture quality your, that experiencing, your There

Reload A Minolta 7000

Reload a Minolta 7000

Changing the film in your camera is an essential part of using your camera. As camera's get more and more complicated with all the different options with film, flashes, speeds and focusing, it can get confusing. The Minolta 7000 has many upgrades and possibilities for creating your own type of pictures and knowing change out the type of film you are using plays a key role in fully enjoying your camera.

Instructions

1. Take pictures with the current film in your camera until you get to the last frame. The camera will chime and display the word "Film" on the screen. The shutter will automatically lock so you cannot double expose your last picture.

2. Place your finger on the "R" button for rewind release and slide this button to the left. It will stay in place while the camera rewinds the film.

3. Look for the "Film" indicator flashing on the screen to read "0." This means it has rewound the full roll of film.

4. Locate the release switch on the side of the camera and press it down to open the back of the camera.

5. Take the rewound film roll out.

6. Place a new roll of film in its place. Take the loose end of the film exposed and place it in the trap lock area for the camera to take hold of the film.

7. Close the back. The screen should now display the word "Film" and the number of pictures on your roll below it; for example, 24 or 36.

Tags: your camera, Minolta 7000, display word, display word Film, film your

Charge A Nimh Battery

There is an appropriate way to charge a NiMH (Nickel Metal Hydride) battery. The process is moderately simple, but requires some familiarity with the manufacturer's instructions. While most chargers are easy to handle and operate, overheating can occur if special attention is not paid or proper use of the charger is not observed.

Instructions

1. Understand the efficacy of charging NiMH batteries. The coulometric charge potential for NiMH batteries averages just below 70 percent. This means that, on average, one NiMH battery requires 150 amp hours to produce 100 amp hours of energy.

2. Pick a charger. The Ultra Fast AA/AAA Battery Charger is manufactured by High Capacity, has a 4- to 6-hour charge time and can charge up to four batteries at a time. The 8- to 10-Hour AA/AAA Battery Charger is manufactured by Duracell and charges up to two batteries at a time.

3. Prepare the charge. Plug in the charger, then select the charging cycle; options can vary from "fast charging cycle" to "slow charging cycle" (see the manufacturer's instructions). Place the appropriate number of NiMH batteries into the charger and start the start timer. Finish by setting the safety timer backup termination feature, if applicable. Allow NiMH batteries to charge completely before removing.

4. Monitor the charge. The voltage in NiMH batteries will dip slightly when they are fully charged. An internal sensor will then signal a drop in voltage and end the charging. If this does not occur, or the device is faulty, monitor and check the battery for overheating at the end of the specified charge time. For example, when using the 8- to 10-Hour AA/AAA Battery Charger, be sure the termination technique has stopped all charging at the 8-hour mark or between 8 and 10 hours. Avoid allowing the battery to charge beyond this period.

Tags: NiMH batteries, Battery Charger, charging cycle, 10-Hour Battery, 10-Hour Battery Charger

Thinkpad Battery Problems

As with all notebooks, a functioning battery is essential for a ThinkPad user. Some ThinkPad users have reported problems with decreased capacity or non-charging batteries.

Decreased Capacity

Most ThinkPads use Li-on (Lithium-ion) batteries which may report reduced capacity due to calibration issues. Calibrate the battery by allowing it to fully discharge and then recharging it back to full capacity. If a sudden loss in battery capacity is experienced the battery may be defective.

Battery Does Not Charge

Troubleshoot a non-charging battery by confirming that the ThinkPad is plugged into a functioning wall outlet; also make sure your adapter is not defective. The ThinkPad will beep when it is receiving power through the adapter. If the adapter is providing power and the battery does not charge check the battery's temperature. ThinkPad batteries will not charge if they are excessively hot. If the battery still does not charge after cooling down it will need to be serviced or replaced.

Recalls

There have been a few battery recalls under which Lenovo will replace a ThinkPad battery at no charge. An automated tool is available to verify eligibility (see Resources).

Warranty

The default ThinkPad battery warranty is one year. Unlike the warranty on a ThinkPad, the warranty on the battery cannot be extended.

Tags:

Hook A Mono Amplifier To Two Subwoofers

Single channel amplifiers provide great stability for powering your car subwoofers. The questions begin to arise when you are looking to power two subwoofers with that same amp. There is no cause for concern, however, because these mono amplifiers will be able to handle most configurations you throw at them as they are stable down to one ohm. With that said, when hooking up dual voice coil four ohm subwoofers you may want to prefer one type of wiring over others.

Instructions

1. Cut four lengths of speaker wire long enough to stretch from one positive terminal on a subwoofer to the other positive terminal on the same subwoofer. Strip 1/8 to 1/4 of an inch from each of the eight ends of the lengths.

2. Cut six equal lengths of speaker wire long enough so that two of the lengths end to end reach the subwoofers from the amplifier. Strip 1/8 to 1/4 of an inch from one end of each of the lengths. Strip 1/2 inch from the other ends.

3. Group together three of the six ends from which you have stripped 1/2 inch. Connect the three ends by twisting them together--for better connections solder them--and covering the connection with electrical tape. Group the other three ends with 1/2 inch exposed and connect them in the same way. After these ends are connected make sure your amplifier is disconnected from its power source.

4. Connect one of the 1/4-inch exposed ends from one of the groups of three wires you connected to the positive terminal on the amplifier. You will need to use either a screwdriver or Allen wrench to secure the end in the amplifier. With the other group of three wires, connect one of the 1/4-inch ends to the negative terminal on the amplifier.

5. Connect the two remaining ends connected to the positive terminal on the amplifier to the subwoofers by connecting one to each subwoofer. You will only connect these wires to one of the voice coils. Simply choose one of the positive terminals on each subwoofer and connect the wires.

6. Connect the remaining ends coming from the negative terminal on the amplifier to the subwoofers. Do the same thing as you did with the positive ends, only use the negative terminals on the same voice coil as you used for the positives.

7. Connect the positive terminal of the second voice coils. To do this take one of the four wires you cut in step one and connect one end to the same terminal on the subwoofer as the positive wire coming from the amplifier. Connect the other end of the wire to the positive terminal on the other voice coil of the same subwoofer. Do the same thing with one of the remaining wires on the other subwoofer.

8. Connect the negative terminal of the second voice coils. Take the remaining two wires and connect one to each subwoofer. Connect one end to the same terminal as the negative wire from the amplifier and the other to the negative terminal on the other voice coil of the same subwoofer. After both negative voice coils on each subwoofer are connected, reconnect the power.

Tags: positive terminal, each subwoofer, negative terminal, terminal amplifier, voice coil, voice coils, from amplifier

What Do Fleas Look Like

Use flea medication to keep your pets happy.

Fleas are found in virtually every corner of the world. There are many types of flea, but all look fairly similar, whether an Asian rat flea in China or a cat flea in Texas. They are fairly easy to identify, either from the appearance of the flea itself or by the eggs and "flea dirt" they leave behind.

Identification of Fleas

All fleas are wingless, and their primary mode of locomotion is jumping. Fleas have six legs, and their hind legs are very long and powerful, making them one of the most proficient jumpers in the world, capable of jumping 200 times their own length. They are usually dark in color and less than 1/8 inch long. Viewed closely, the flea body is hard and shiny and even if compressed between fingernails, will withstand great pressure. They have adapted this way to be able to survive biting and scratching by their animal hosts. Most people do what they can to control fleas and protect their pets with flea collars or flea medication.

Features of Fleas

Even if one does not see a flea, their presence is easy to detect. Naturally, their bites cause itching, sometimes intense. They lay very small, white oval eggs which are can be seen with the naked eye, often in grass, carpeting and on an animal's fur. When the larvae hatch, they immediately spin a sticky cocoon, which attracts dust and is very difficult to see. After one to two weeks, the larvae hatch into mature fleas. They leave "flea dirt," which many people mistakenly identify as feces. The little black specks you may see in a flea-infested dog's fur are actually dried blood left behind from feeding.

Types of Fleas

There are over 2,000 species of fleas throughout the world. The most common type in North America is the cat flea. Despite its name, this flea will infest dogs too, as well as other livestock, humans and wild animals.

Effects of Fleas

While most fleas are merely an itchy nuisance, they can be vectors for more serious diseases. The most common complication from fleas in domestic dogs is a flea allergy, known as flea dermatitis. Dogs which are allergic to the flea's saliva can get an intensely itchy rash from a single bite. In response, the dog will chew and scratch, often until they are bleeding, in an effort to alleviate the itching. Another common complication in flea-ridden dogs is tapeworms, which the dog gets by ingesting flea eggs as they groom themselves. Tapeworms mature in the intestinal system and can grow several feet long. Usually the owner will see tapeworm segments in the feces, around the dog's anus or sometimes on bedding. An untreated tapeworm infection eventually leads to a malnourished dog. It is easily treatable with a single dose of wormer.

Flea Control

Fleas are intolerant of extreme cold, or rainy, wet conditions. In very humid climates are those where it freezes over winter, fleas are a seasonal problem. Hot, dry year around climates are ideal for fleas and can pose the greatest challenge to dog owners. The best way to control fleas is prevention by keeping all animals in the household on vet-prescribed flea medication or using flea collars.

Tags: flea medication, common complication, flea collars, flea dirt, larvae hatch, most common

Record A Movie From Dvr To Vhs Tape

Record a Movie From DVR to VHS Tape

While not as revolutionary as the video cassette recorder, the average DVR is far easier to program and use. The image and playback quality on a DVR is far superior to a video cassette as well. Unfortunately, every DVR has a finite amount of space and it's often desirable to transfer a recording from your DVR to a video cassette for long term storage. Anyone with a rudimentary understanding of the two devices can easily perform this task.

Instructions

1. Connect your DVR output to the VCR input. Most VCRs and DVRs have coaxial connections for direct connection. A coaxial cable is the type that has a pin in the center of the tip and screws on to the connection device. If both are not equipped with coaxial connections, you can use RCA connections (red-, white- and yellow-tipped cable). Some DVRs and VCRs are also equipped with S-video or HDMI, which transfer higher-quality sound and video. Unfortunately, due to the constraints of the video cassette medium, the higher quality will most likely be imperceptible on the final taped recording.

2. Connect the VCR output to the TV input using the coaxial cable so you can visually monitor the DVR's feed. Again, if the coaxial output isn't available you can use an RCA or other available connection.

3. Turn on all three devices. Make sure the TV and VCR are in the right input modes. Most TVs will use either a non-broadcast channel, such as channel 3 or 4, or will have a separate channel dubbed "cable" or "auxiliary input." VCRs normally only have two input modes, TV or VCR. Check the device's owner's manual for specific tuning instructions.

4. Insert a record-enabled tape into the VCR. Video cassettes come with a record block tab, so make sure that tab is in place. If the tab is broken out or pushed in, the VCR will not go into record mode for this particular cassette.

5. Cue up the movie you'd like to record on the DVR and hit pause once it's at the point you'd like the recording to begin.

6. Push the record button on the VCR and in quick succession, un-pause the DVR immediately afterwards. Your movie should being playing/recording.

7. Push stop on the VCR and the DVR when the movie has ended. Rewind the video cassette and hit play to verify you have successfully recorded the movie before deleting it from your DVR. If you plan to keep this movie on cassette permanently, push in the record tab on the cassette to prevent accidental erasure or recording.

Tags: video cassette, coaxial cable, coaxial connections, equipped with, From Tape, from your, input modes

A Date Stamp On A Printer

Some printers have the option to automatically include a date stamp.

When you print off photographs from your digital camera or images stored on your computer you may want to also include a date stamp for verification purposes. While you can edit the image to include a date stamp, there isn't any need to actually alter the original picture. Depending on your printer's manufacturer and model it may include an extra option to automatically print the date or time on the corner of the picture.

Instructions

HP

1. Press the "menu" button on the HP printer's interface. Use the down arrow key to navigate to the "Preferences" option in the menu screen.

2. Press "OK" and use the down arrow key to navigate down to the "Add Date/Time" menu entry. Press "OK" again.

3. Scroll to the "Date/time" option to include both the date and time in the stamp. Scroll to "Date only" to only display the date, or select "Off" to turn off the date stamp option.

4. Choose "OK" to select the highlighted option.

Lexmark

5. Press the "Copy" button on the Lexmark printer's menu panel. Tap the down arrow key on the menu panel until you reach the "Options" entry.

6. Press the "check mark" confirm button to confirm your choice. Scroll down to the "Time Stamp" entry.

7. Press the right arrow key to choose "On" or press the right arrow key again to choose "Off."

Epson

8. Press the "Cancel" button twice on the Epson printer's front panel to return to the main menu screen. Press the down arrow icon twice to highlight the "More Options" entry.

9. Press the "OK" button. Scroll down with the down arrow icon to the "Date Stamp" entry. Press "OK" to turn on the option.

10. Scroll to the date format you want to use, such as "yyyy.mm.dd" or "mm.dd.yyyy." Press "OK" to confirm the choice. Scroll down to "Time Stamp" if you want to include the time as well.

11. Press "OK." Scroll to either "12 hour" or "24 hour" and press "OK" to confirm the choice. Press "Print" to save the changes.

Tags: down arrow, entry Press, include date, include date stamp, Scroll down, arrow icon

Use A Kodak Memory Card

A memory card allows you to expand your camera’s storage capacity. It is a removable and reusable card that comes in a variety of memory sizes. You can store photos on this memory card and share them with others, or use it to transfer photos to a computer at your home or at a photo processing site. It's important to learn use the Kodak memory card properly, because if you don't you could end up damaging it while removing or installing it in your camera. Moreover, it's important to know transfer data from the card to a computer.

Instructions

Inserting into the Camera

1. Open the card door. It is typically found on the side or bottom of the camera.

2. Hold the Kodakk memory card with its connecting end--the end with the metal contacts--pointed toward the camera.

3. Push it all the way into the card slot. You will feel a slight click.

4. Don't force the memory card in if it doesn't slide smoothly all the way into the slot. You may be trying to install it in the wrong direction. Check the alignment and try again.

5. Close the card door.

Removing from the Camera

6. Open the card door.

7. Press the "Eject" button next to the card slot. If there is no eject button, press gently on the top of the card to activate a spring that will eject the card. The card will partially slide out of its slot.

8. Hold the outer end of the card and take it out carefully.

9. Close the card door.

Sending Photos from Memory Card to Computer My Computer. Here you will see a list of available drives. Under "External Drives," you will find the Kodak memory card’s folder listed.

12. Double-click the memory card folder. Go to a subfolder (if any) to access the photos. Press "Ctrl" + "A" to select all the photos. If you want to select specific photos, highlight each manually while holding down the Ctrl key.

13. Press "Ctrl" + "C" to copy the selected items.

14. Go to your computer’s desktop or another folder where you would like to keep the photos. Press "Ctrl" + "V" to paste the copied items into the folder.

Formatting the Card

15. Slide the memory card into the memory card slot of the Kodak camera.

16. Turn the camera on. Go to "Preferences"/"Camera Setup" from the menu.

17.Look through the options and select the "Format Memory" option.

18. Select "Do It" > "Continue Format" to verifythat you want to format all data in the memory card.

Tags: memory card, card door, card slot, memory card, Press Ctrl, Camera Open

Work A Blackberry Memory Card

A Blackberry memory card can be used to store photos and data. Installing and using one of these cards is fairly simple and straightforward.

Most Blackberry series phones support MicroSD cards. The cards can be purchased at any electronics store. All phones support 2gb cards; later OS systems will support 4gb, but to be safe, purchase a 2gb card.

Instructions

Use a Blackberry Memory Card

1. Slip the phone into the microSD slot. It is usually located on the side of the phone. The card will slide into the slot and lock into place when pushed down. Simply close the slot, and the card is inserted.

Curve models have the SD slot underneath the battery. To install it, simply take the battery out. There will be a metal hinge underneath. Open the hinge and slide the card into place. Close the hinge; the card is installed.

2. Once you have installed the card, format it for safety reasons. You can format the card directly from your Blackberry. Enter the "Options" menu on your Blackberry. Scroll to the "media card" option and click "Format Card." You will be given a prompt that asks you to confirm the format; hit "Yes" and wait for another prompt to inform you that the card has been formatted.

3. Return to the media-card screen. Turn on encryption and enable the mass-storage mode.

Once everything is set up, you are ready to use the memory card on your Blackberry.

4. To transfer file,s connect your Blackberry to your computer. Open the Blackberry desktop manager on your computer. Simply drag and drop the files you would like to have on your Blackberry into the file manager on the Blackberry Desktop. The files will begin to transfer to your Blackberry.

You will be prompted when the files have been successfully transferred.

Tags: your Blackberry, Blackberry Memory, into place, Memory Card, memory card, phones support, your computer

Set A Universal Tv Remote Control

You can program a universal remote control to run pretty much any of your entertainment devices. A little extra time and money spent on a universal control can give you control over your entire home theater experience without having to juggle several remotes. Programming the universal remote control is easier than it might seem and takes just a few simple steps.

Instructions

1. Read the instruction manual. Most remotes will be set up in one of two ways: Some remotes may have a point-and-press feature built into them to help you determine the programming codes for a certain device. Others require you to manually program codes for your devices into the remote. Your remote should come with a list of codes.

2. Identify the appropriate programming code for your device (DVD player, television, etc.). Enter the code for the device, and press "Save" or "Enter."

3. Test the functionality of the device with the universal remote. Depending on the different makes and models, some features or functions may by incompatible with some devices.

4. Repeat this process with all desired devices.

Tags: universal remote, universal remote control

Move Ipod Music From Computer To Flash Drive

Move iPod Music From Computer to Flash Drive

It takes a lot of music to fill an iPod: Models available as of January 2010 can hold up to 40,000 songs. To transfer that music to your iPod, you must first load the files to iTunes, which takes up space on your computer's hard drive. If you need to free space on your hard drive without deleting your music, save it to a USB flash drive. You can then add it back to your computer later or copy your iPod music files to transfer them to another computer.

Instructions

1. Connect your flash drive to your computer by inserting it into a high-speed USB port.

2. Open the flash drive on your computer. If you're using a Mac, a desktop icon will appear once your computer recognizes your flash drive. If you're using a PC, Windows Explorer will display an external drive. Double-click on it.

3. Open the iTunes music folder on your computer. In most cases, the folder is located in your "Documents" folder on a Mac or in "My Documents" on a PC.

4. Click on the song you want to move to the flash drive and drag it to open flash drive folder on your computer. To move multiple songs, hold down the "Apple" button on a Mac or the "Control" button on a PC and select additional songs before dragging them to the flash drive folder.

Tags: your computer, flash drive, Computer Flash, Computer Flash Drive, drive folder, drive your, drive your computer

Download Music To A Sansa Disk 1gb Mp3 Player

The Sansa digital music player allows you to take all the MP3 files from your computer and listen to them no matter where you go. However, there is no program that automatically updates your Sansa player, so you have to manually transfer your music. Once you've found a suitable way to download music, transferring that music onto your Sansa player is just a drag and click away.

Instructions

1. Choose a legal downloading method and download the music you wish to add to your Sansa player (see Resources section).

2. Plug your Sansa player into your computer with the USB cord it came with. Wait a moment to allow your computer to recognize your player.

3. Click "Open device and view files" from the prompt that opens. If a prompt does not open automatically, click your desktop's "Start" button, click "My Computer" and double-click the music player to view its files.

4. Click "Internal Memory" and open "My Music."

5. Locate the music you just downloaded on your hard drive.

6. Select the songs you would like to add to your player and drag them to the "My Music" folder. Wait for the transfer to complete, and safely remove your player.

Tags: your Sansa player, Sansa player, your Sansa, your computer, your player

Scan Photos Into A Computer

Scan Photos Into a Computer

When you scan photos into a computer, you are creating digital images, which can be edited, uploaded to websites, sent to family and friends in emails, and easily used in a variety of other ways. Special hardware is required to scan photos into a computer. Desktop scanners come in a variety of styles and designs, yet many operate in a similar fashion.

Instructions

1. Hook up a scanner to your computer. A desktop scanner typically has two cords. One is an electrical cord, and the second is a cord that connects to your computer.

2. Plug the Universal Serial Bus (USB) plug into your computer. Normally, the cord that connects the scanner to the computer has a USB plug. Find an empty USB receptacle in your computer and plug in the cord. After you hook up the scanner to the computer, you will need to plug the electrical cord into an outlet and turn on the scanner.

3. Download the scanning software onto your computer. The scanner will usually include a CD or DVD with software to manage the scanner. Insert the disk into your computer's CD or DVD drive and follow the instructions that come with the owner's manual to download.

4. Start scanning photographs when the scanner setup is complete. Lift the lid to the scanner, lay the photo to be scanned facedown on the glass portion of the scanner and close the lid. The glass should be clean; be careful you do not scratch or damage the surface.

5. Press the button to begin scanning the photograph. On some scanners, there are buttons that instigate the scanning process. On the scanner in the photo, the button with an icon that resembles a scanner is pressed to scan a photo.

6. Choose the desired options in the menu that pops up. After you push the button to begin the scanning, a menu may appear on the screen, where you can make choices on what you want the scanner to do. Since you are scanning a picture from the glass on the scanner, that option is checked.

7. Check the type of file to create. Photos can be saved to your computer in a variety of file formats, such as GIF, TIFF or JPEG. In this instance, the JPEG option is chosen in the drop-down menu.

8. Choose the size of the image to create. If you are scanning your photo to use for printing, you will want to increase your ppi to 300. If you are planning to use the photo on the web, it won't be necessary to increase the size.

9. Check the option to preview the scan. This will allow you to see the scan before you actually save it to your computer.

10. Click the "Scan" button or link, after you have finished choosing your options.

11. Adjust the border of the photograph. So you don't have to edit later, you can pull the corners of the image in or out to edit the perimeter of the picture.

12. Click the "Scan" icon to complete the scan. The new digital image will be saved on your computer's hard drive. Read the instruction manual that comes with your computer to determine the default location where the images will be saved.

13. Click "yes" or "no," depending on whether you want to scan more images or if you are finished.

Tags: your computer, begin scanning, button begin, button begin scanning, Click Scan, computer plug, cord that